💧 Caravan Mains Water Float Valve – Fits Aqua roll, Aquarius & Rolly Poly.

🔄 Automatic Top-Up – Maintains 20 litres water level at all times.

⚡ High Pressure Resistant – Works up to 60psi with pressure reducer.

🛡️ Flood-Safe Design – Excess water flows out safely if valve fails.

🔧 Easy Installation – Pre-tested, screw in & connect with Hozelock push-fit.

Please note this won't fit the new 51 litre water hog


Here are some basic instructions for use

1. Position your Aquaroll/Water Hog in its normal position at the side of the caravan
2. Remove the caps from the top and the side of the Aquaroll/Water Hog
3. Insert the float valve assembly into the side opening of the Aquaroll/Water Hog and secure the attached screw cap.
4. Drop your submersible pump into the water connector in through the top opening of the Aquaroll / Water Hog as normal.
5. Connect the end of the hose with the “water stop” connector to the male connector on the ball valve assembly.
6. Connect the other end of the hose to the mains water tap using adaptors.
7. Turn on the tap and the Aquaroll will start to fill with fresh water.
8. As the water level rises the float valve will close, shutting off the water supply.
9. As you draw water from the Aquaroll via the caravan’s water pump the valve will open maintaining a volume of about 20 litres of fresh water within the Aquaroll / Water Hog.

Package Includes：1set x replacement float valve kit