150W Battery Capacity Tester Constant Current Electronic Load Discharge Meter AU
Product Description
This product is a direct current CNC electronic load, with a maximum power of 150W and a maximum load current of 20A. 2.4inch TFT color screen, with four working modes design, constant current mode, constant voltage mode, constant power mode and constant resistance mode. Voltage, current and power overrun protections can be set; stop discharge voltage and discharge time can be set. Multifunctional design, the system menu interface supports switching between English and Chinese, zeroing of accumulated data, zeroing of voltage and current at no load, voltage calibration and current calibration, standby time setting, and restoration of factory settings.
Features:
This product is a direct current CNC electronic load, with a maximum power of 150W and a maximum load current of 20A. Support test the capacity of power battery.
2.4inch TFT color screen, with voltage, current, power, electricity, capacity, internal resistance, load, operating mode, OVP, OCP, OPP, stop voltage, time limit discharge display function.
It has four working modes design, constant current mode, constant voltage mode, constant power mode and constant resistance mode.
Voltage, current and power overrun protections can be set; stop discharge voltage and discharge time can be set.
Power supplying temperature can be monitored by an external NTC sensor.
Multifunctional design, the system menu interface supports switching between English and Chinese, zeroing of accumulated data, zeroing of voltage and current at no load, voltage calibration and current calibration, standby time setting, and restoration of factory settings.
The product works with a 12.0V1A independent power supplys and is equipped with an integrated silent (20±3dBA) alloy heat sink, with an intelligent temperature control system controlling the work of the heat sink fan.
Compared to traditional analogue electronic loads, it adopts protects first and then work mode to control the discharge, which can effectively protects the discharge power supplys from damage caused by over-limit and over-discharge.
It adopts four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, making the voltage measurement more accurate, the four-wire system is downward compatible with the two-wire connection method, when wiring, you only need to make the A+ and V+, V- and A- respectively short connection.
Specifications:
Name: Electronic Load
Material: printed circuit board
Load type: CNC electronic load
Working voltage: 12VDC with 12 V, 1A power adapter
Load voltage: 0-150VDC
Load current: 0-20A
Load power: 0-150W (max. 60W above 120V)
Wiring method: A+ V+ V- A- four-wire system, downward compatible with two-wire system
Maximum power measurement: 999.999Wh
Maximum capacity measurement: 999.999Ah
Cumulative timing range: ddd:hh:mm:ss (days:hours:minutes:seconds)
Operating modes: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
Overvoltage protecting: supports up to 150V overvoltage protections
Overcurrent protecting: supports up to 20A overcurrent protections
Over-power protecting: supports up to 150W over-power protections
Limited voltage discharge: also called low voltage protections, support, default unlimited voltage discharge, set according to your needs
Time limit discharge: support up to 99 hours: 59 minutes time limit discharge
Heat sink: Alloy integrated silent heat sink, internal temperature ≥40°C or current ＞3A automatic operation
External temperature measurement: connect NTC 3950 10K 1% temperature sensor to measure and display temperature from 0-100°C
Chinese and English interface switching: supported
Zeroing of total data: supported
Voltage and current no-load nulling: supported
Voltage open calibration: supported
Current open calibration: Support
Screen brightness adjustment: Support
Screen hibernation standby setting: Support
PC software online: Not supported
Restore factory settings: Support
Item size: 165 * 95 * 80mm / 6.50 * 3.74 * 3.15in
Item weight: 400g / 0.88lb
Package size: 195 * 105 * 135mm / 7.68 * 4.13 * 5.31in
Package weight: 625g / 1.38lb
Packing List:
1 * Electronic Load
1 * Adapter
1 * NTC Sensor
Features:
This product is a direct current CNC electronic load, with a maximum power of 150W and a maximum load current of 20A. Support test the capacity of power battery.
2.4inch TFT color screen, with voltage, current, power, electricity, capacity, internal resistance, load, operating mode, OVP, OCP, OPP, stop voltage, time limit discharge display function.
It has four working modes design, constant current mode, constant voltage mode, constant power mode and constant resistance mode.
Voltage, current and power overrun protections can be set; stop discharge voltage and discharge time can be set.
Power supplying temperature can be monitored by an external NTC sensor.
Multifunctional design, the system menu interface supports switching between English and Chinese, zeroing of accumulated data, zeroing of voltage and current at no load, voltage calibration and current calibration, standby time setting, and restoration of factory settings.
The product works with a 12.0V1A independent power supplys and is equipped with an integrated silent (20±3dBA) alloy heat sink, with an intelligent temperature control system controlling the work of the heat sink fan.
Compared to traditional analogue electronic loads, it adopts protects first and then work mode to control the discharge, which can effectively protects the discharge power supplys from damage caused by over-limit and over-discharge.
It adopts four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, making the voltage measurement more accurate, the four-wire system is downward compatible with the two-wire connection method, when wiring, you only need to make the A+ and V+, V- and A- respectively short connection.
Specifications:
Name: Electronic Load
Material: printed circuit board
Load type: CNC electronic load
Working voltage: 12VDC with 12 V, 1A power adapter
Load voltage: 0-150VDC
Load current: 0-20A
Load power: 0-150W (max. 60W above 120V)
Wiring method: A+ V+ V- A- four-wire system, downward compatible with two-wire system
Maximum power measurement: 999.999Wh
Maximum capacity measurement: 999.999Ah
Cumulative timing range: ddd:hh:mm:ss (days:hours:minutes:seconds)
Operating modes: four modes CC-constant current mode CV-constant voltage mode CP-constant power mode CR-constant resistance mode
Overvoltage protecting: supports up to 150V overvoltage protections
Overcurrent protecting: supports up to 20A overcurrent protections
Over-power protecting: supports up to 150W over-power protections
Limited voltage discharge: also called low voltage protections, support, default unlimited voltage discharge, set according to your needs
Time limit discharge: support up to 99 hours: 59 minutes time limit discharge
Heat sink: Alloy integrated silent heat sink, internal temperature ≥40°C or current ＞3A automatic operation
External temperature measurement: connect NTC 3950 10K 1% temperature sensor to measure and display temperature from 0-100°C
Chinese and English interface switching: supported
Zeroing of total data: supported
Voltage and current no-load nulling: supported
Voltage open calibration: supported
Current open calibration: Support
Screen brightness adjustment: Support
Screen hibernation standby setting: Support
PC software online: Not supported
Restore factory settings: Support
Item size: 165 * 95 * 80mm / 6.50 * 3.74 * 3.15in
Item weight: 400g / 0.88lb
Package size: 195 * 105 * 135mm / 7.68 * 4.13 * 5.31in
Package weight: 625g / 1.38lb
Packing List:
1 * Electronic Load
1 * Adapter
1 * NTC Sensor
PayPal, MasterCard, Visa, American Express and Google Pay. Afterpay will be listed as an option if it is available.
All items are dispatched from our warehouse in Melbourne or Sydney, Australia.
Under normal conditions, delivery will take between 3 and 8 working days after dispatch, depending on your location. Remote areas will required longer delivery time. If you are given a tracking number, please use it to track the delivery status of your order.
We regret that our warehouse is not accessible to the public. As such, we do not offer a pick-up option.
Please pay attention to shipping exclusions and enter the postcode of your delivery address in the ‘Postage and Payments’ section of the listing. Applicable postage and handling fees will be displayed.
Shipping fees include postage and handling fees. If you have selected registered post, tracking numbers will be provided via eBay when your order is dispatched.
We work with different courier partners to provide reasonable freight costs and quality service. The type of courier used is dependent upon size and weight of each item and the delivery location.
Postage and handling fees are calculated based on the weight and size of each product. Hence discounts on freight costs are not available.
Some products may be dispatched in more than one carton.
We currently dispatch only to addresses within Australia.
Buyers must agree with the above postage and handling terms before purchase
Under normal conditions, delivery will take between 3 and 8 working days after dispatch, depending on your location. Remote areas will required longer delivery time. If you are given a tracking number, please use it to track the delivery status of your order.
We regret that our warehouse is not accessible to the public. As such, we do not offer a pick-up option.
Please pay attention to shipping exclusions and enter the postcode of your delivery address in the ‘Postage and Payments’ section of the listing. Applicable postage and handling fees will be displayed.
Shipping fees include postage and handling fees. If you have selected registered post, tracking numbers will be provided via eBay when your order is dispatched.
We work with different courier partners to provide reasonable freight costs and quality service. The type of courier used is dependent upon size and weight of each item and the delivery location.
Postage and handling fees are calculated based on the weight and size of each product. Hence discounts on freight costs are not available.
Some products may be dispatched in more than one carton.
We currently dispatch only to addresses within Australia.
Buyers must agree with the above postage and handling terms before purchase
Our guarantee to you is that you can return an item for any reason up to 30 days from purchase. Please contact our customer service team to start that process.
Return shipping costs are paid for by you.
A restocking fee may apply if the item is not returned in its original condition and packaging.
Do not return any products before receiving instructions from our customer service team.
NOTE: Cancelling your order when it is in transit counts as a return.
Return shipping costs are paid for by you.
A restocking fee may apply if the item is not returned in its original condition and packaging.
Do not return any products before receiving instructions from our customer service team.
NOTE: Cancelling your order when it is in transit counts as a return.
Copyright © 2023 Dianxiaomi