Features: X79 LGA 2011 DDR3 Motherboard Support NVME M.2 & SATA(NGFF) M.2 Support PCI-E 3.0/2.0, SATA 3.0/2.0, USB 2.0 Two Channels, Max 256GB Memory Support Wake-on-LAN, Diskless Support Power on After Power Fail
Specifications: Brand: JUXIESHI Model: X79 S7 Chip Set: Intel X79 Processor: Intel Core LGA 2011 full series CPU processors (As: Xeon 5-xxxx-v2, e5 xxxx, etc.) RAM Memory Type: DDR3 NON-ECC/ECC/RECC RAM , Supports 2 Channels Maximum memory capacity: 256GB=4*64GB DDR3 RAM Supports SATA 2.5-inch solid-state drive, SATA 3.5-inch mechanical hard drive, NGFF M.2 solid-state drive, NVME M.2 solid-state drive (PCIe 3.0 x4, the highest measured The speed is 3600M/S) PCIE Slot: PCI-e 3.0 X16, PCI-e 2.0 x1 Storage port: 1* SATA III, 2* SATA II , NVME(Gen 3) M.2 /SATA M.2 I/O ports: 2*P/S, 8*USB2.0, 1* RJ45, 3* Audio Interface Power socket: 24-pin & 8-pin power connector. Fan power port: 3-pin System Fan*1, 4-pin CPU Fan*1, 2-pin 5V Fan Power supply: 6+1-phase power supply Enter BIOS: After pressing the power button, continuously press the " DEL " Quick Boot Option: Press " F11 " continuously after pressing the power button( You can boot it without installing a graphics card or enter the system） Sound Card: REALTEK ALC661 2.1 Channels Network Card: Realtek 8111H, Gigabit Ethernet (RJ-45), RAID: Not supports Support: Wake-on-LAN Support: Pwron After PW-Fail Support: Diskless Dimensions: 215MM*187MM Motherboard type: M-DTX Weight: about 0.85kg
Note: The default startup mode of this motherboard graphics card is set to only support UEFI. Old graphics cards that do not support UEFI mode cannot light up, and legacy (traditional) mode systems (ghost version systems, pirated systems, systems installed on USB drives) cannot enter the system If you need to use an old graphics card or legacy system, you need to enter the BIOS to change the graphics card boot mode to Legacy. The method is as follows: After making the changes, press F10 (save and exit BIOS)
Package Included: 1 x MACHINIST X79 S7 Motherboard 1 x I/O Shield 1 x SATA Cable
Important! - We don't have the User Manual & Driver in the packing box, if any trouble , please let us know, and we are here helpping you. If you mind of those, please don't purchase. Thank you for your understanding and time.
Tips: (1) Socket backplane color may vary from lot to lot, but will not affect the use of the product. Cos products are continuously optimized and upgraded. (2) Please allow a 1-3mm difference due to manual measurement. (3) Due to different monitors and different lighting, the pictures may not show the actual color of the goods. Thank you for understanding. (4) This floor plan requires a powerful power supply. Make sure your power supply is sufficient for this scenario. (at least 500w brand power supply) (5) The CMOS battery is not included, it will be taken out before shipment, because the battery is prohibited according to the logistics rule.