eBay

Product Description

Smart 12V 24V Battery Charger Maintainer

Initialization Mode: the battery charger performs a full battery health diagnostic analysis and polarity test.

Repair: car battery charger performs desulfation to dissolve any detected sulfuric acid crystals growing on battery lead plates. NOTE: If it has been idle for along time, old or cannot be charged, select "REPAIR" mode to try to activate the battery.

Bulk Charging Mode: portable battery charger charges the battery at a constant current to allow the voltage to rise, recharging ~80% of the battery capacity.

Absorption Mode: once the battery voltage reaches 14.4V (for 12V batteries), the charger voltage is maintained at this level, allowing the battery current to reduce.

Float Mode: the car charger pulse charges the battery at 13.5V, to maintain the full charged status of the battery without overcharging it.

8 Kinds of Protections, Charge with Confidence

AI INTELLIGENT MULTIPLE PROTECTION

When a ( Short circuit occurs / Overcurrent protection / Overheat protection / Fireproof protection / Low pressure protection / Overpressure protection / Mislink protection / Electrification protection ) the charger will automatically turn off the power supply to protect the battery and charger.

SUITABLE FOR MORE ENVIRONMENTS

The best charging work can also be completed in harsh environments such as winter rainy season and summer.

HIGH TEMPERATURE HEAT DISSIPATION

High temperature intelligent adjustment, can automatically adjust the charging current according to the temperature environment, and comes with a cooling fan to provide perfect charging in summer.

PRODUCT SPECIFICATIONS

Input Voltage: 100-240V 50-60Hz
Output Current: 12V/8A, 24V/4A
Battery Type: All SLA batteries (Wet, MF, GEL and VRLA), AGM (Flooded and EFB), LiON
Operating Temperature Range: -20~45°C (-4~113°F)
Input Power with Load: Max.130W
Input Power No Load: 3.2W

Ensure your battery is compatible with the battery charger maintainer and operating area is well ventilated and dry.

Connect the alligator clips/ring terminals to the DC cable, and then connect the AC cable to the charger.
Connect the red clamp (+) to the positive pole and the black clamp (-) to the negative pole of the battery (if the battery is connected incorrectly, error code “E - -” will be displayed on the screen).
Connect the charger with AC power source and the charger will begin charging the battery.
Once the battery is fully charged, the Battery Power Indicator will show “FUL” – maintain charging for at least 1-2 hours afterwards.
Unplug the charger or leave on Float Mode.

ABOUT YONHAN

YONHAN is the direct manufacturer specializing in electrical products and accessories for the automotive industry, such as battery chargers, 12v usb outlet, Male Cigarette Lighter Plug, Motorcycle USB Charger and more.

Get the best products and service here directly from YONHAN store on Amazon.
Battery Charger 10-Amp
- 30% FASTER QUICK CHARGER
- HIGH-EFFICIENCY PULSE REPAIR
- 8 CHARGING PROTECTION
Battery Charger 20-Amp
- FASTER QUICK CHARGER
- SUPER LARGER DISPLAY SCREEN
- Charge or repair all 12V and 24V lead-acid automotive, Lifepo4, AGM, GEL, SLA
6A Charger with LED Display
- Upgraded LED & Color Screen Display
- 5 Modes Selection for Versatility
- Added TKL Mode for Automatic Charging
Large Screen 10A Charger

Foldable Handle; Inclined Screen for Easier Operation; Cable Organizer on the Back; Stronger Alligator Clips

30% FASTER QUICK CHARGER
Intelligent Battery Charger
Battery Charger 8-Amp
- Intelligent Digital Display and Detection
- Smart Touch Buttons
- Multiple Protection
QC3.0 Dual USB Charger Socket