This machine is used for oral orthosis and repair specialty. After sandblasting, the machine is used to electropolish the stainless steel or cobalt alloy castings such as denture bracket, crown bridge and clamp ring, so that the surface finish of the castings can meet the requirements. Can also be used for special crafts metal casting processing. The machine is compact in design, beautiful in appearance, small in size, easy to place, using double cylindrical electrolytic cell, working at the same time, high efficiency, suitable for electrolytic polishing of castings at different angles. The cathode of the machine is cylindrical, the anode is V-shaped bracket, and the bracket is equipped with alligator clipping casting. The timing switch controls the electrolytic polishing time, and the electrolytic polishing current can be continuously controlled.
Product Parameters
Voltage:
110V
Power:
250W
Average anode current:
Constant current adjustable
Dc output voltage:
0-20V
Time range:
0-15min
Electrolytic cell capacity:
800ML
Package size:
18.9"*13.78"*11.81" (48cm*35cm*30cm)
Net weight/Gross weight:
17.75LB(8.05KG) / 20.94LB(9.5KG)
Product Features & Advantages
1. Electrolytic Cells:
2. Vent Hole:
This machine is equipped with two electrolytic cells can be cleaned, two anodes, can be used at the same time, improve the efficiency, convenient and practical.
There are a large number of vents on the back of the machine, which can timely discharge the excess heat generated by the machine, prevent the temperature from being too high, and protect the machine.
3. Control Panel
4. Support Legs
LED digital tube display panel, intuitive display of time and current, simple and convenient operation, reading at a glance. The working time and current can be appropriately adjusted according to the size of the workpiece.
Four rubber support legs at the bottom, which are non-slip, wear-resistant, good silence, can ensure the stability of the machine, and can prevent water from entering the machine from the bottom.
- The output voltage of the machine is stable, controlled in the best range, and the current distribution is uniform, which can effectively avoid excessive electrolysis Influence on the size of the workpiece. - It can effectively protect the electrolyte, prolong the service life of the electrolyte and reduce the cost. - The current can be controlled to completely avoid the situation of frequent fuse burning and component burning caused by the rising current of traditional electrolysis machine. - Select precision potentiometer, adjust current more accurately. - With overload, overheating protection function, longer service life.
Operating Instructions
1. Pour the electrolyte into the electrolytic cell, and fix the electrolytic tile (cathode) by both ends of the electrolytic cell. 2. Clamp the bracket (workpiece) with the clamp (anode), the workpiece should be connected with copper wire hanging, put into the electrolyte, pay attention to not contact with the electrolytic tile. 3. Set the working time and adjust the current according to the size of the workpiece, it is recommended to use high current to quickly deal with the surface, and then reduce the current to increase the brightness of the mirror. 4. After setting time is over, take out the bracket (workpiece) and rinse it with water.
Item Included(056454)
Electrolytic Polisher *1
Fuse *2
Power cord *1
On Apr 29, 2024 at 00:45:43 PDT, seller added the following information:
We accept PayPal payment,PayPal Credit,Credit card or debit card and so on. We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
We only ship the item to the eBay Verified address that is sent to us at the time of checkout, most shipment will be shipped within 1-5 business day. Please verify the correct shipping address in your eBay account before making your payment. Shipping time during holidays may take longer than normal. Any brokerage, customs, and duty fees associated with international shipments are the customer's responsibility and are not included in our shipping charges. If you are located outside of the continental 48 United States, please email us in advance to see if the specific item ships to your location. These orders are generally shipped within 1-5 days after payment is received. Please be patient as they are often subject to additional inspection upon delivery.
All of our products have a 30-day return policy. We ensure that all our items are new and in good condition before shipping. If you receive an item that does not meet the above criteria, please contact us via e-Bay message. All returns must be received under the new original conditions and subject to shipping confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return it, please check twice to make sure the item doesn't work and contact our customer service representative to let us know the details of the problem and send us some pictures for confirmation.
We only accept returns in the original packaging. Please ensure that the item has not been vandalized. Used items will not be accepted for return.
If you are missing parts, please contact me through eBay message first, we can send you a replacement after confirmation, please do not start the return first
Welcome to our eBay store. As a leading emerging manufacturer and exporter, we have been specializing in commercial and industrial products for over 10 years. We believe that it is our vision and mission to provide you with innovative products with the best service and competitive prices. Our goal is to ensure that you find exactly what you need and that it is easy for you to place your order.
Email Customer Support:
9:00am to 2:00am PST Sunday to Friday
All emails will be answered within 12-24 hours, and we will try to reply you immediately. Please don't worry,
