FA-590A Automatic Screw Counting Machine Screw Feeder Screw Conveyor Machine φ1mm-5mm
Feature s :
1. The number 0-9999 can be set arbitrarily
2. With high precision counter
3. Wide application range, the size of the track is adjustable from 1.0 to 5.0mm
4. Convenient and fast, the output speed is about 90PCS/min
5. Simple and lightweight, can work on the table
Specification:
Type: Automatic screw counting machine
Model: FA-590A
Applicable range: Suitable for various types of screws with nut (Max length:20mm)
Applicable screws: Screw diameter 1.0-5.0mm (adjustable)
Output speed: 2 screws/sec
Input voltage: AC110V-220V
Product size: 125*180*150mm
Net weight: 3.3kg
Counting screw machine mode setting
Manual mode setting:
1.Select manual mode: In the shutdown state, press and hold the B button, then press the power button to turn on, display E000 (manual reset mode), then press the A button to switch to
E001 (automatic reset mode), press the A key to switch between manual mode and automatic mode and finally press the F key to confirm save and exit
2.Fixed number setting: In the power-on state, long press the A button (press and hold), it will start to count down, after the beep, release the A button to display d010 (factory default setting 10
A), press the A key to add processing, and press the B key to subtract processing. After setting properly, finally press F key to confirm save and exit.
Auto mode setting:
1.Select automatic mode: In the shutdown state, press and hold the B button, and then press the power button to turn on, and E001 (automatic reset mode) is displayed, if it is not E001, you can
Press the A key to switch to E001. It is best to press F key to confirm save and exit.
2.Delay setting: In the power-on state, long press the B button (press and hold), it will start to count down, after the buzzer, release the B button, and display FF03 (the factory default is 3 seconds delay
Hour), press the A key to add processing, and press the B key to subtract processing. After setting up properly, finally press the F key to confirm save and exit
3.Fixed number setting: In the power-on state, long press the A button (press and hold), it will start to count down, after the beep, release the A button to display d010 (factory default setting 10pcs), press the A key to add processing, and press the B key to subtract processing. After setting properly, it is best to press F key to confirm save and exit.
What in Package:
1x FA-590A Automatic Screw Counting Machine Screw Feeder
NOTE:
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
