12V Rear View Reverse Camera Anti Interference Filter for VW Mercedes CAN-Bus US

Product description

Signal filter for retrofit reversing cameras on timed reversing lights / Canbus

Current vehicles usually have a pulsed reversing signal at the reversing light due to the CAN bus.

If the power supply for a reversing camera were to be tapped there, it would only flicker.

The reversing camera CAN-BUS adapter from enables direct connection of the reversing system to the reversing light for power supply, even in modern vehicles with CAN bus, thus saving additional wiring.

 

Features

-No more image interference when the engine is running!

Current vehicles usually have a pulsed reversing signal at the reversing light due to the CAN bus.

The filter stabilizes the DC voltage to 12 volts. As a result, there is no flickering or other interference in the image from the reversing camera when the engine is running.

 

-Compact design

Design: Minimalist, high-quality design

Loadable up to 1 ampere (1A) | 12 volt voltage

Filters interference signals from the power supply to the reversing light. This means that the reversing light current can be used as a switching signal or power supply (max. 1A). Particularly suitable for pulsed reversing signals, e.g. in Can Bus systems

 

-Simple installation

Connect the positive poles to the positive ones and the negative poles to the negative ones:

Red - 12V input (reversing light current)

Black - earth

Red - 12V output (power to reversing camera)

The cables are labeled according to the connections.

We recommend installation by a specialist.

 

Product information

Suitable for : Timed reversing signals (e.g. for Can Bus systems)

Load capacity : 1 ampere (1A)

Voltage : 12 Volt (12V)

Cable length: approx. 20 cm

S-cope of delivery: 1x interference suppression filter for reversing camera

 

PushAuction