Dental Locator Abutment Overdenture Male Caps Fits NEODENT GRAND MORSE GM 1-6mm
Models for choose:
- NEODENT GM351-1mm Abutment
- NEODENT GM352-2mm Abutment
- NEODENT GM353-3mm Abutment
- NEODENT GM354-4mm Abutment
- NEODENT GM355-5mm Abutment
- NEODENT GM356-6mm Abutment
- NEODENT 1.0mm GH Abutment & Male Cap kit
- NEODENT 2.0mm GH Abutment & Male Cap kit
- NEODENT 3.0mm GH Abutment & Male Cap kit
- NEODENT 4.0mm GH Abutment & Male Cap kit
- NEODENT 5.0mm GH Abutment & Male Cap kit
- NEODENT 6.0mm GH Abutment & Male Cap kit
Product Description:
- Implant System Compatible With: NEODENT GRAND MORSE
Abutment Diameter:
- NEODENT GRAND MORSE
Abutment Length:
- 1.0mm,2.0mm,3.0mm,4.0mm,5.0mm,6.0mm
Introduction:
- Attachment Abutment Product Description:
- All Overdenture Abutments come pre-mounted with a placement tool for ease of use.
- Classic Housing Cap and Retention Insert design.
- Fully bio-compatible material.
- Exhibits increased hardness and wear resistance.
- Reduced bacterial adhesion.
- Enhanced lubricity compared to the traditionally
- used Five-grade titanium,Softer, more aesthetic gold color.
Retention Caps Kit
- 1pcs Metal Housing with Laboratory Insert Replacement Assembly
- 1pcs 0.8lbs Retention Caps
- 1pcs 1.2lbs Retention Caps
- 1pcs 2.4lbs Retention Caps
- 1pcs Block Out Spacers
Locator ® Male Processing Kit
Material : PEEK
(●Replacement male yellow-0.8lbs/blue-1.2lbs/pink-2.4lbs)
●PEEK can withstand higher temperature and pressure, high tensile strength, high performance and high stability than nylon.
●Metal Housing Dental Laboratory Processing Cap
Metal Shell,embedded with The black hat is used by technicians.
Material : black hat，PEEK
The black hat is used by technicians.
Please change it to another three colors in clinic.
●Locator ® Block Out Spacers
Place block-out spacers on the heads of the locator abutments.
Position denture cap with integrated black processing onto the locator abutments.
lfnecessary add additional block-out spacers until no gap is visible between female, block-out spacer and gum.
●Note:For Overdenture Locator Abutment.
Locator Core Tool:
- The Loca-tor Overdenture Attachment System features a Core Tool that contains 3 tools in 1.
- This convenient tool is used to carry and place the LOCA-TOR Abutment, remove the LOCA-TOR Male, and insert the male into the LOCA-TOR Denture Cap.
- Insert drivers for various types of torque wrenches are available to achieve 30 Ncm of torque.
REMOVAL:
- The male removal tip has a pointy end useful for gripping and removing the retainers of the metal caps incorporated in the overdenture.
INSERTION:
- The central part of the Remove core tool, once detached from the tip, has a cylindrical end specially designed for inserting the retainers in the metal caps.
SCREWING:
- This end of the Remove core tool, acts as a driver for carrying the Remove abutment into the oral cavity and as a hand driver for fixing it to the implant.
How to use:
- Loosen the Removal End of the Core Tool. You will see a visible gap between the removal tool and seating tool.
- Insert the Removal Tool Tip into the Denture Assembly and push straight into the Male. Tilt the tool so that the sharp edge of the tip will grip the Male and pull it out of the Denture Cap.
- Once the Male is removed proceed to point the tool down and away from you. Tighten the Removal Tool Clockwise back onto the Core Tool. This will disengage the Male from the tip of the Removal Tool
- Separate the Removal Tool part of the Remove Core Tool. Use the Seating Tool to place a new Male into the empty Denture Cap
FDA Statement
● The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
● Seller's name: pinlide-dent
● City State: Zhengzhou, Henan China
● Telephone number：+86371-68618288