FOXWELL SD101 PRO Car Leak Detector EVAP Smoke Machine Fuel Oil Pipe Test Tool

What Can Foxwell SD101 PRO Do?

You will be able to Accurately detect the location of the leak, when you encounter the following situation.
-Frequent refilling oil/coolant
-Smell something weird
-Spot Strange Fluid or Spots
-Engine running too hot
-Car dashboard lights up

Foxwell SD101 PRO Introduction:
FOXWELL SD101 PRO is an entry-level pipeline leak detection tool. It can quickly and accurately locate leaks in any pipeline system, help technicians and automotive users quickly solve problems, and reduce diagnostic time.
 
Foxwell SD101 PRO Main Selling Points？
1. Built-in Air Pump: Engineered for ease, ST101 Pro eliminates the need for external gas sources, offering swift setup and immediate functionality.  The built-in pump ensures efficient operation while enhancing portability, allowing you to effortlessly move the smoke tester automotive wherever it's needed.
2. Two Working Modes (Smoke Mode & Air Mode): When you opt for the air mode, the flow meter helps you swiftly confirm if there's a leak.  After that, switch to the smoke mode to pinpoint exactly where the leak is happening.  This significantly boosts diagnostic efficiency and prevents the wastage of a large amount of smoke fluid, saving costs.
3. Adjustable Smoke Volume: Adjust the smoke volume according to the characteristics of the system to avoid potential damage to the measured system.
4. A Must-have Flow Meter: Check out the float in the flow meter to see if there's any change - that helps confirm if there's a leak.  Plus, it lets you figure out how big the leak is, down to the millimeter.  Twist the knob a bit, and you can keep the smoke and air flow just right, meeting the testing needs of different car systems.
5. Use Frequency Conversion Technology: high temperature protection, no need to stop and wait, can be normally detected. In addition, reduce the power of the whole machine, reduce the consumption of battery power
6. User-Centric Design: The ST101 Pro breaks away from traditional aesthetics with its streamlined design, steering clear of sharp edges that could scratch the skin or vehicle surface.  Its unique horizontal liquid level window allows for precise pouring of smoke fluid.  Different colored indicator lights make it easy to quickly identify the current operating mode.  There are even more designs that prioritize the user's experience.
7. Energy Saving and High Efficiency: no need for high-power battery, no need for too much soot, can also produce thick smoke. No need to preheat, compared with other similar products, smoke faster, thicker, no need to wait.
8.Precision Testing for Sensitive System: Providing a low pressure of 0.5 PSI, perfect evap smoke machine leak tester.   it's ideally suited for precision-demanding, more sensitive systems with smaller pressure requirements, such as EVAP systems, vacuum systems, and more. Ensure testing the automotive systems under simulated normal operational conditions.

 

Support Multi-system Test

EVAP System Test
Intake System Test
Exhaust Systems Test
Crankcase system test
Car Sealing Test
Fuel Tank System Test
Turbo System Test
Various Pipe Fittings Test

EVAP & E-G-R Test
American cars after 1996 and European cars after 2000 are equipped with EVAP servi.e port. Usually, the evap service port is located in the engine compartment, but there are a few exceptions.
OBD trouble codes related to EVAP system include p0443-0457/p0465-0469. If sucn trouble codes are detected, EVAP system should be tested.

1.EVAP system: find the EVAP service port (usually there is a green cover on the service port), use the special tools for EVAP valve to remove the valve core inside the service port (please note that the valve core is reverse thread), install the EVAP service port test adapter, and connect the smoke tube.
2.E-G-R valve /carbon canister: disconnect the quick connector connecting the pipeline, select the test connector and tee connector of the same specifcation in the test kit to connect them in series, and connect the bypass test pipe to the smoke cone of the smoke tube.
3.Switch on the main unit and it start produce smoke, and lead the smoke into the service port while thick smoke.
4.Few moment later start to detect the leakage.

 

Wide Range of Applications:

The Foxwell SD101 automotive smoke leak detector is suitable for detecting pipeline system leaks on cars, motorcycles, snowmobiles, beach bikes, light trucks, heavy-duty trucks, and speedboats.Supports all 12V vehicle batteries.

EVAP Detection
When the EVAP system leaks, the engine fault light will light up, and the car emissions are not environmentally friendly.
Turbo Charging Test
Leaks in turbocharged engines can result in reduced power performance and reduced fuel economy.
Replace the Diesel Filter
As environmental standards rise, the importance of diesel filtration systems is beyond doubt. Leakage detection is required after replacing the new filter.
Pipeline Leakage
The aging of automobile pipelines and ash lead to various faults and dangers, which can be eliminated in time to drive safely.

 

How To Use It?

1. Inject 10ml-20ml of test oil into the smoke leak detector, filling 20ML of test fluid, under standard working conditions, can be used continuously for about 10 minutes; (about Smoke Oil: advise use the Baby oil)
2. Open the pipe that needs to be connected with the leak detector.
3. Install the airbag adapter into the sealed pipe and connect the device to the smoke conduit.
4. Connect the leak detector to the DC12V battery and the device will start working. NOTE: red clamp tp positive(+), and black clamp to negative(-)
5. The pipe will be filled with smoke and the leakage point will be checked.
6. Test the leaking pipeline, under the premise of sealing accurately, generally about 1 minute can be filled with smoke, if there is a leak, within 3 minutes, you can observe the results.

Caution:
1. When you use this Foxwell SD101 Car Smoke Leak Detector for the first time, fill with 10-20ml baby oil. Please be careful NOT to beyond this range.
 2. Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20ml each time.
 3 . Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
 4. During the process of leak detection, please keep away from smoke-sensitive parts.
5. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
 6. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
 7. The round part of this detector has temperature, please be careful to avoid burns.
 8.  If the test pipe needs to be disconnected in the middle, please sE~Ure the other side with a rubber stopple.
 
Built-in Air Pump
Engineered for ease, ST101 Pro eliminates the need for external gas sources, offering swift setup and immediate functionality.  The built-in pump ensures efficient operation while enhancing portability, allowing you to effortlessly move the smoke tester automotive wherever it's needed
 
 
New Smoking Technology
The new patented smoke generation technology reduces energy consumption and increases smoke concentration while ensuring test requirements.
Low power consumption
Compared with the old smoke generation technology, the new smoke generation device has lower energy consumption, and the power consumption is reduced by about 30%.
Low temperature rise
The new patented structure slows down the temperature rise of the smoke chamber, and the temperature rise rate of the new structure is reduced by more than 40% under the same working time.
Low fuel consumption
The new patented smoke generation technology improves the efficiency of smoke generation, and the consumption of smoke oil is only about 3ml in the case of 10 minutes of work.
 
 
Overheat and Antifreeze Protection:
The smoke detector is equipped with the latest intelligent protection devices. When the temperature of the equipment exceeds 75 degrees Celsius, the power protection device will intelligently start and shut down to ensure the safety of the operator and equipment. If the device operates continuously for more than 15 minutes, it will be protected from overheating for a protection time greater than 10 minutes. This device is also suitable for low-temperature operation. Only car batteries with a full capacity of 12V are supported.
 
 
Product Size & Weight & Details
 
 

Packing List:

1x SD101 PRO Main Unit
1x Box
1x Funnel
1x Hook
1x Smoke Tube
1x Cap Stoppers (8 Pcs)
1x EVAP Test Connetor
1x Power Cords
1x EVAP Test Kit
1x  User's Manaul

  • We accept Credit cards、Debit card、Apple Pay、Google Pay ect payment.
  • Please contact us first if you need to use another method to pay.
  • Payment should be made within 3 days after bidding ends, or we would cancel it for you.
  • Buyers should be responsible for any taxes.
  • Please include your special requests in eBay note if there is any.
 
  • Seller Processing Time：Items would be shipped out within 1 business day after cleared payment.
  • Carrier and Logistics：All Orders are Free shipping via Royal Mail (Logistics: Royal Mail Tracked 24/48). If you need express, extra postage price would be charged.
 
  • VAT Fee: The price has included a 20% VAT fee, which is charged by the EBAY platform, not by the seller.
  • Guarantee: 100% Genuine, 7 Days Free Exchange, 1 Month Free Return and Full Money Back Guarantee, Lifetime Free Technical Support.
  • Warranty: 12 months free repair for the devices.3 months for the accessories. Please contact us firstly when you need warranty service. Please contact us firstly when you need warranty service.
  • We are selling OBD Product, including OBDII Code Reader, Car Diagnostic Tool, Truck Diagnostic Tool, EVAP Smoke Machine, Car Power Probe,Battery Tester ect. The price is reasonable and we have top rated after-sales service.
  • Our main brand is ANCEL, and we also sell other brands product, such as FOXWELL, LAUNCH, THINKCAR, AUTOPHIX, etc
  • We have office and warehouse in UK, Australia and US to ensure fast shipment and after-sale service.
  • We have more than 100 employees devoting to customer satisfaction.

 
 
 
  • Our customer-oriented service strives for positive feedback with all 5 star selling ratings.
  • We automatically submit positive feedback to our buyers once the payment is cleared.
  • If anything about your transaction did not meet your expectations, PLEASE LET US KNOW AND GIVE US THE OPPORTUNITY TO MAKE THINGS RIGHT before you leave feedback or open any case.
  • We are 100% sure that we can solve any issues regarding your purchase.
  • We will reply within one business day. Business time: GMT8 (9:00-18:00) from Monday to Friday.

On 25-Dec-2025 at 01:58:03 GMT, seller added the following information:

Datacaciques