Feature:
1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information;
2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed.
3.Perfect to your replace broken suitcase handle,comfortale to grip
4.Easy to install,you can attach them with screws
5.It can be widely used for suitcase,box,luggage,case

Specification
Material:Zinc alloy,PVC
Color:Black and silver
Size:Total lenght(with end caps) :about 1.7cm/0.67 inch
Spare Handle Strap length:about 12.5cm/4.92 inch
Handle Wide:about 2.5cm/0.98 inch
Brand name:
Weight:100g

Package include:
1 x Suitcase Handle
2 x Metal End caps
4 x Screw gaskets
4 x screws 10mm
4 x screws 16mm
1 x Screwdriver with a cross and a flat head
Perfect to your replace broken suitcase handle,comfortale to grip
Easy to install,you can attach them with screws
It can be widely used for suitcase,box,luggage,case
Note: Applicable to suitcase installation with a center distance of 150 mm for the inner mounting holes and a center distance of 215 mm for the outer mounting holes.
Dimensions: Overall length 22.5cm (8.85 inches), handle length 12.5cm (4.92 inches) Inner hole distance: 15cm (5.9 inches), outer hole distance: 21.5cm (8.46 inches) Metal mount size: 1.2cmx4.5cm/0.47x1.77 inches (W x L) hole spacing: 3.2cm (1.25 inches)
Warm reminder: These are DIY replacement repair supplies. The handle does not fit all suitcases. If you are not sure whether the size is suitable for your suitcase, you can leave us a picture of your damaged handle or the hole position map of the bag wheel and the size. We will find a suitable handle as soon as possible and get back to you
Purchase instructions:1.Your choice of handle replacement should be based on the hole location at the end of the handle. If you can find a handle that matches the size of the hole location, the handle will fit snugly against the housing, but allow movement to grip the handle and allow slack between your hand and the housing. 2.Carefully pull back the liner, remove the old handle, put a flat washer on each screw to keep the bolt from going through the housing, tighten the screw, put the liner back in