Description:
▶ This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, like fiber banner.
▶ The fabric hot cutter is a wonderful tool with good cutting effect.
▶ There is no rough edges after cutting.
▶ The heat cutter tool is power saving and easy to operate.
▶ The temperature cutter blade can up to 600°C.
▶ Also, the instructure is reasonable and comfortable to use.
▶ Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.

 

Feature:
• Durable and Practical.
• No rough edges after cutting.
• Power saving, only 100W.
• Long life span and can work continuously.
• Much lighter and easy for shipping with low freight cost.

Specification:
Voltage: 110V
Power: 100W
Speed: Adjustable
Length of the Wire: 3M
Intermittent Operation: 1/4min

 

Package includes:
1 x Hot Heating Knife Cutter
1 x Blade
1 x Little Wrench
1 x Cleaning Brush
1 x Plastic Storage Box

 

Note:
1. Always operate the hot knife in well ventilated space.
2. Never burn off the excess residue on the hot knife blade. The blades will over heated and be warped.
3. Only operate hot knife when it is in contact with the insulation board.
4. Keep hot blades away from skin, clothing and other flammable materials.
5. Allow blades to cool before handling. Hot knife may cause injury or burns to exposed surfaces.
6. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the hot knife will operate again.