220V 500W micro hydraulic turbine generator water electromagnet full copper core

Type: Hydroelectric generator
Nozzle diameter: 1.8CM
Water level difference: 7-15M
Flow rate: 0.008-0.011m3/s
Material: copper + metal
feature:
1. The generator adopts the best NdFeB permanent magnet and high-grade pure copper winding, which can generate power stably and efficiently.
2. Specially designed rotor and rotor, low resistance at start-up and good cooling
3. Gearless, direct drive and low rare earth permanent magnet generators for easy operation and maintenance.
4. Die-cast aluminum alloy shell, anti-corrosion, acid and alkali resistance, salt corrosion resistance

application:
This unit can be used in remote areas to provide temporary power. The customer connects the unit to a collapsible hose (fire hose) to obtain temporary power during camping.
Suitable for household lighting, TV, electric furnace and other pure resistance household appliances
Not suitable for household appliances, such as refrigerators, washing machines, pumps, etc.

installation steps:
After the unit foundation of the poured concrete is solidified, the unit is installed in place and then watered sequentially. The water level must be measured with a water level gauge to ensure that the unit is held in a horizontal position. The gap between the equipment and the floor should be sealed with cement and no water seepage is allowed. After installing the equipment, check and turn the turbine shaft of the turbine by hand. If the machine is flexible, the installation is complete.
Installation requirements: The bottom of the turbine is in close contact with the base plane.

note:
The 500w hydroelectric generator can only be used under the following two conditions:
1) The vertical water level difference between the unit base and the hydro-generator must be within the following range: 5-15M
2) The water flow must always be filled with water pipes larger than 7.5cm in diameter.


specification:
Output voltage: AC 220V
Power: 500W
Nozzle diameter: 1.8CM
Water level difference: 7-15M
Flow rate: 0.008-0.011m3/s
Pressure tube diameter: 8CM (3 inches)
Material: copper + metal
Weight: 28KG



Package Included:
1x micro hydro generator