Description
Transimpedance Amplifier High-speed IV-AMP1615L for 1M Bandwidth of Signal Detection APD Sensor
Description:
- IV-AMP1615L is a bandwidth transimpedance amplifier with a gain coefficient of 100KV/A and a gain bandwidth greater than 1MHZ. It has the characteristics of high bandwidth and high magnification. The minimum current resolution of the transimpedance amplifier is 10 nA, which is compatible with and adaptable to most high-speed photodiode PD. The low ripple precision power supply matched with the amplifier ensures the excellent noise performance of the amplifier within 1MHz bandwidth. It is usually used in weak signal detection, pulse light conversion, laser ranging, high-speed photoelectric detection and fluorescent material detection.
Parameter:
- Model: IV-AMP1615L
- Type: Transimpedance amplifier
- Power supply: Distribution of low ripple precision power supply
- Input signal form: Single terminal current
- Input signal interface: BNC female
- Input current range: ±33uA
- Minimum resolution of input current: 10nA
- Gain coefficient: 100k V/A
- Linearity: 1%
- Gain bandwidth: DC-1MHz at HI-Z
- Rise time: 0.3uS
- Output impedance: low resistance
- Output voltage range: ±3.3V (Hi-Z)
- Output current: ±1mA (MAX)
- Bias voltage regulation range: ±3V
- Weight: 68g
- Module protection: None, no reverse connection protection, no limit current protection
- Specification: 89 x 46 x 19mm (L x W x H)-PCB size
- Module heating: No heat sink, no heat dissipation required for normal operation
- Operating temperature: -25â——+75â
- Feature: High-speed current to voltage, zero point adjustable
- Scope of application: photoelectric detector, data acquisition front-end, weak signal detection, etc.
- Module interface type: 3PIN aviation socket, BNC female.
Package Included:
- 1 x IV-AMP1615L
- 1 x Supporting low ripple precision power supply
- 2 x 30cm SMA to BNC high-frequency wire
- 1 x 10cm BNC girdling tin wire
- 2 x Photoelectric adapter board
- 1 x Low-speed photocell (PN502)
Note:
- The power supply of the amplifier is a precision low ripple power supply. The aero plug should ensure stable insertion to ensure normal power supply.
- As the amplifier is a high-precision high-speed device, it is recommended to use matching wire to avoid unnecessary interference
- The input signal shall not be over range or over voltage input, and the module has no protection circuit.
- Poor contact or poor-quality wire may cause signal attenuation or excessive noise.
Description:
- IV-AMP1615L is a bandwidth transimpedance amplifier with a gain coefficient of 100KV/A and a gain bandwidth greater than 1MHZ. It has the characteristics of high bandwidth and high magnification. The minimum current resolution of the transimpedance amplifier is 10 nA, which is compatible with and adaptable to most high-speed photodiode PD. The low ripple precision power supply matched with the amplifier ensures the excellent noise performance of the amplifier within 1MHz bandwidth. It is usually used in weak signal detection, pulse light conversion, laser ranging, high-speed photoelectric detection and fluorescent material detection.
Parameter:
- Model: IV-AMP1615L
- Type: Transimpedance amplifier
- Power supply: Distribution of low ripple precision power supply
- Input signal form: Single terminal current
- Input signal interface: BNC female
- Input current range: ±33uA
- Minimum resolution of input current: 10nA
- Gain coefficient: 100k V/A
- Linearity: 1%
- Gain bandwidth: DC-1MHz at HI-Z
- Rise time: 0.3uS
- Output impedance: low resistance
- Output voltage range: ±3.3V (Hi-Z)
- Output current: ±1mA (MAX)
- Bias voltage regulation range: ±3V
- Weight: 68g
- Module protection: None, no reverse connection protection, no limit current protection
- Specification: 89 x 46 x 19mm (L x W x H)-PCB size
- Module heating: No heat sink, no heat dissipation required for normal operation
- Operating temperature: -25â——+75â
- Feature: High-speed current to voltage, zero point adjustable
- Scope of application: photoelectric detector, data acquisition front-end, weak signal detection, etc.
- Module interface type: 3PIN aviation socket, BNC female.
Package Included:
- 1 x IV-AMP1615L
- 1 x Supporting low ripple precision power supply
- 2 x 30cm SMA to BNC high-frequency wire
- 1 x 10cm BNC girdling tin wire
- 2 x Photoelectric adapter board
- 1 x Low-speed photocell (PN502)
Note:
- The power supply of the amplifier is a precision low ripple power supply. The aero plug should ensure stable insertion to ensure normal power supply.
- As the amplifier is a high-precision high-speed device, it is recommended to use matching wire to avoid unnecessary interference
- The input signal shall not be over range or over voltage input, and the module has no protection circuit.
- Poor contact or poor-quality wire may cause signal attenuation or excessive noise.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
