Prevent boost leaks, add 10.2 hp and 9.8 lb-ft. tq, improve throttle response. The HPS Performance Hot and Cold Side Charge Pipe Kit is the essential upgrade engineered to replace the factory charge pipe system, providing significant performance improvements for your vehicle. With a larger 2.25-inch diameter on the hot side and 2.5-inch diameter cold side pipes made from 6061 mandrel bent aluminum, the enhanced airflow and reduced restriction increases the engine output by 10.2 horsepower and 9.8 lb-ft of torque, resulting in improved throttle response, acceleration, and overall engine performance. The HPS Performance Charge Pipe Kit is made with reliability in mind. This kit utilizes 4-ply high temperature and oil resistant silicone couplers and stainless steel clamps to deliver dependable performance under the most demanding driving conditions. The charge pipe features a 1/8" NPT port on the lower cold-side pipe to facilitate the installation of additional sensors, injectors, or solenoids. In addition to the enhanced performance, the HPS Performance Charge Pipe Kit also offers improved reliability. The included 4-ply reinforced oil resistant silicone couplers and embossed stainless steel hose clamps ensure a secure and leak-free connection. These couplers are designed to handle high boost pressures, resist degradation from oil, and provide excellent heat resistance while the stainless steel hose clamps offer a tight fit that prevents slipping or loosening. This kit is designed to be a direct bolt-on replacement, making installation straightforward and hassle-free. All the necessary hardware and components are included, ensuring a proper and secure fit. With its larger diameter charge pipes, durable construction, and included oil resistant silicone couplers and stainless steel hose clamps, this kit offers improved throttle response, increased horsepower, and a more exhilarating drive with the HPS Performance Charge Pipe Kit installed in your vehicle. Improves acceleration with dyno proven gains up to 10.2 horsepower and 9.8 lb-ft. of torque without retuning the ECU. Replaces and upgrades your stock intercooler piping with high flow aluminum tubing. 2.5" cold side and 2.25" hot side mandrel-bent aluminum tubing for optimized air flow. Minimizes the risk of boost leaks while providing better throttle response and acceleration. Includes HPS 4-ply oil resistant silicone couplers and 100% stainless steel embossed clamps. **This product is not CARB exempt and is unavailable for purchase in California or for use on any pollution controlled motor vehicle.**