Material: polyester
Weight/m²: 95g
Thickness/mm: 0.085
Tensile strength/Mpa: ≥15
Elongation at break/%: ≥100
Maximum use temperature: 200℃
Product Introduction
This product is co-extruded through appropriate formulations. It has strong vertical and horizontal tension and good peeling effect. It has uniform thickness. It is suitable for epoxy, polyester and vinyl resin systems. It is helpful for the vacuum auxiliary materials after the vacuum process is over. Remove.
Buyers note: This is not a release product with a release effect. The release cloth is mainly to reduce the resin content of the product and make the product hand-laid surface look smoother and beautiful without excess resin accumulation.
Operation method: After finishing the glass fiber cloth/carbon fiber cloth, brush the resin and cover it with the release cloth. It is best to use a scraper or the like to scrape the release cloth several times to scrape off the excess resin, etc., and then tear it off after curing. The resin content of products such as mold cloth is reduced and the surface looks smooth and beautiful.
Weight/m²: 95g
Thickness/mm: 0.085
Tensile strength/Mpa: ≥15
Elongation at break/%: ≥100
Maximum use temperature: 200℃
Product Introduction
This product is co-extruded through appropriate formulations. It has strong vertical and horizontal tension and good peeling effect. It has uniform thickness. It is suitable for epoxy, polyester and vinyl resin systems. It is helpful for the vacuum auxiliary materials after the vacuum process is over. Remove.
Buyers note: This is not a release product with a release effect. The release cloth is mainly to reduce the resin content of the product and make the product hand-laid surface look smoother and beautiful without excess resin accumulation.
Operation method: After finishing the glass fiber cloth/carbon fiber cloth, brush the resin and cover it with the release cloth. It is best to use a scraper or the like to scrape the release cloth several times to scrape off the excess resin, etc., and then tear it off after curing. The resin content of products such as mold cloth is reduced and the surface looks smooth and beautiful.