Micromotor.eu HLI012 Liliput DB VT 25, DB VT 33, DR VT 137 Coreless Motor Kit

Micromotor.eu HLI012 Liliput DB VT 25, DB VT 33, DR VT 137 Coreless Motor Kit

Liliput 12501-12504, 12506-12509

Motor 225 600 000

Contents Include

Coreless Motor, 3D Printed Motor Cover, x2 Brass Gears, Shaft Adaptor, Wires

Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted.

Recommended Is: Loctite 603 Retaining Compound.

Fitting Instructions Are Via Micromotor Youtube Channel.

(Pictured Locomotive Example (s) Are NOT Included.)

Coreless Motor Information:

Guarantee for 1 year

Do not use with feedback controllers.

Do not use with an analogue low frequency PWM ( Pulse Width Modulation ) Controllers. i.e. H&M Half Wave.

DCC Frequency to at least 16 kHz (Preferred 32 kHz or higher) using the recommended correct coreless motor settings AS ADVISED by the manufacturer of the decoder.

Maximum settings of slow speed starting it is recommended to use the correct coreless motor settings AS ADVISED by the manufacturer of the decoder.

Don’t remove the old capacitor over the motor as the high peaks that the decoder provides on slow running speeds (when it has some resistance) causes a motor coil to burn out and in a lot of cases also a burn out of the decoder.