To ensure that your new compressor will work without issue, you should do the following, prior to installation:
1. Check for blown fuses and ensure the relay is working properly.
A failed Air Suspension Compressor.
Relay is a top cause of air compressor failure.
They normally fail in the ''closed'' position and should be replaced during compressor installation.
2. Check and replace the Air Springs if they are showing signs of cracks, deterioration,
moisture, or are leaking.
Complete Air Strut assemblies, which include the Mount and Air Spring, can be found in the Strut category.
3. Verify that the air line and wiring harnesses are connected.
4. Ensure that the fittings and valve connections are fully.
5. Check the electrical connections and the orientation of the Ride Height Sensor armsseated and
undamaged.
Make sure that the air line is secured at the proper depthywithout signs of physical damage.
6. Check all Air Suspension Solenoid connections and fittings;
insspect for any cracks or other damage.
7. Inspect the air lines for kinks, holes or other damage.