|
Welcome
 Product Description
Features:
【300% Brighter Vision】Equipped
with premium 3570 LED beads, Bevinsee S350 LED Headlight bulbs offer an
astounding 300% increase in brightness compared to standard LED lights.
See farther and clearer at night, ensuring enhanced visibility and a
safer drive.【Efficient Heat Management】With a combination of a copper substrate, aircraft-grade aluminum double clamps, and a powerful 10,000 RPM fan, Bevinsee S350 LED Headlight bulbs effectively dissipate excess heat from the LEDs. This advanced heat management system prevents overheating and extends the lifespan of the bulbs up to an impressive 50,000 hours. 【Perfectly Focused Beam Pattern】Say goodbye to dark spots and uneven beams! The Bevinsee S350 LED Headlight bulbs provide a flawless 1:1 luminous point output, resulting in a sharp cut-off line and an evenly distributed beam. No more dazzling oncoming drivers - just pure clarity and safety. 【IP68 Waterproof】Designed to withstand even the harshest weather conditions, Bevinsee S350 LED Headlight bulbs are highly resistant to heavy rain, snow, and fog. Drive with confidence, knowing that your headlights are protected every minute of your journey. 【Effortless Installation】No need to stress over complicated installations. The Bevinsee S350 LED Headlight bulbs feature a plug-and-play design, complete with a built-in driver. Simply replace your old bulbs, and you're good to go! No additional wiring harness required. Specifications:
Power: 50W/Pair
Color Temperature: 6000-6500K White
Luminous flux: 6,000LM/Pair
Material: aircraft-grade billet aluminum
LED chip: 3570
Operating voltage: DC12-24V
Lifespan: >50,000 Hrs
Waterproof rating: IP68
Package Included:
1 pair of LED Headlight Bulbs
This item doesn't have self-decoding/self-Canbus【anti-flashing /anti-warning】function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1. The headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2. The on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3. The bulbs does not work. What you can do is connect the bulbs to 12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2: use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1. Install the decoder(not included); the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2. Install the resistor, you need professional installation.
3. Using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.
Note: For some Vehicle models, when installing the H1/H7 LED bulbs, you need some specially modified/customized adapters/holders/buckles of headlamp for your vehicle, which is to fit the LED bulb correctly!!! FAQ
Q1: Will the bulbs suitable for my vehicle?
1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above.
2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand.
3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit!
Q2: What if I encounter a dashboard error message or flickering?
A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem.
Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor.
Q4: How to get the best light output?
A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page.
Q5: What should I do if there is a quality problem?
A: Please send ebay message to us, we will solve any problems for you as soon as possible.
Q6: The bulbs doesn't fit my vehicle.
1. The bulbs size maybe wrong, pls double check before order.
2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you.
Q7: Warrning about polarity
A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.
You may also like:
DISCLAIMER
Disclaimer: mark2brother parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citro?n etc.
Payment Policy
 Shipping Policy
Return & Refund
Feedback
 About Item
Customer Satisfaction
Visit Our Store For Best Deal!
|
On Apr 27, 2026 at 05:09:23 PDT, seller added the following information: