eBay

【DURABLE MATERIAL】 The parallel rail system is made of high-quality aluminum alloy material with high hardness and good durability. The product's parallel guide rail system has a smooth surface, is not easy to bend, and is not easy to break, so you can use it with confidence. Note: The scale bars for this parallel track system are in millimeters. Ps.【The parallel rail system is compatible with Makita track, Festool track, Triton track, Mivochi track】
【ADJUSTABLE 】The stoppers and guides of the parallel tracks can be adjusted. Track sections can be joined to form up to 47 in. Stops for parallel tracks are adjustable. First loosen the large screw and then the small screw, so that the limit block can be adjusted left and right.
【EASY TO READ SCAL】 This aluminum alloy parallel rail rail system adopts spliced track chute, the screw contact area is large, the wrench can pass through the screw to estimate the position, and the track will not protrude during operation. The scale line on the tool is clear, the measured value can be read easily and clearly, adding more convenience to reading and working.
【WIDELY USED】Aluminum parallel rail rail system guides wood while sawing and safely and easily wraps and quickly clamps to rails on planers, shapers, table saws or log pickers for safe, high-precision cutting.

8* Track Guide(197-497mm/497-797mm/797-1097mm/1097-1397mm)

2* 375mm Sliding strip

4* M-16mm Screws

4* M-10mm Screws

4* 17.8mm Sliders

2* Blue Plastic Plugs

2* Stainless Steel Plugs

1* Stainless Steel Plugs

1* Wrench

6* 63mm Sliders

2* 153mm Sliders

2* Link Boards

4* Limit Stops

1. Screw the O-type screws on the short strip and the long strip respectively.
2. Connect the long cross screw, connecting plate and sliding block in turn.
3.Connect scale strip with a short strip successively: 197-497mm/497-797mm/797-1097mm/1097-1397mm
4.and then install limit stop, stainless steel strip, blue plastic plug and stainless steel plug.
5. Fix the circular saw guide rail and parallel guide rail with short cross screws.
6. The other side is in the same order as above, and the splicing can be completed.