Product Description

OAKAHOMIE'S LED COLOR TEMPERATURE RANGE

1. Warm White: LED Color Temperature is 2000K~2800K, the number is smaller, the temperature is tint of yellow.

2. Coolow White: LED Color Temperature is 6000K~8000k,the number is bigger, the temperature is tint of blue.


How to use the remote control

1.Timer SettingPress the "on" button to turn on the timer, the lights will keep the current mode 6 hours and then auto off.The Lights will auto on at the timer setting time the second day.Turn off the lights to close the "Timer" Function.

2. The Infrared reception is susceptible to light interference. For example, in the seventh fast strobe mode, the light must be a little far from the receiving head (more than 5 cm), otherwise the reception will be insensitive.

  • Remote Distance is 3-5m(9-16ft).
  • "8" is steady mode,1-7 is different twinkle mode.
  • 10 brightness level, press the "+" and"-" to adjust the brightness.
  • If the remote doesn't work, please try to change batteries.

CR2032 Battery Operated String Lights

ATTENTION PLEASE

1.This is a very convenient lights, the battery life is 3-4 days continuous 6 hours per day,the remain off for 18 hours.You need replace the battery when the lights get dim.

2.The led string lights is waterproof, suitable for both indoor and outdoor lighting decorations, The battery box is not waterproof .

3. Do not install or locate this products near electrical or gas heaters, fireplaces,candles or other heat sources

4.Do not handle the LED lights in a manner that cut or damage wire insulation

  • Control button : Turn on and off the lights and change lighting modes.
  • If you do not use the lights recently, please remove the batteries from the battery case.
  • Do not attempt to replace LED bulbs, they are non-replaceable.

Battery installation and replacement

Remove two screws

Open the battery pack cover according to the arrow show in figure 1. Remove two screws from lower cover.

Open the battery pack

Remove used batteries, then insert new CR2032 batteries as show in figure 2~3.

  • Note the positive and negative terminals of the battery pack
  • Make sure the copper sheet is good contact with battery in the battery case.

Install new CR2032 batteries

Remove used batteries, then insert new CR2032 batteries as show in figure 2~3.

  • Note the positive and negative terminals of the battery pack
  • Make sure the copper sheet is good contact with battery in the battery case.

Close the battery cover

The new batteries were installed, and make sure The lights can be working, you can close The battery cover as show in figure 4.

Check the package list

When you received the package , please check if there are 6pcs string lights, 2 remotes in the box.

Check if the lights working normal

CR2032 battery in the battery case, use the remote and try if the OakHaomie string lights working normal.

Decorate trees with the lights

Untie the string lights carefully and wind in on tree or other things.

Store the string lights after use

Remove the string lights from tree or other thing, and take the batteries out, wind them on a paper tube and then put them in box.

Received the package

Check fairy lights

Decorate Home

Store it after use