Have your own Dogecoin solo micro-mining farm! 10x DOGE Nerdminers with a PowerSupply w/6 USB ports!

(Configure each one at a time)

(10x)Dogecoin NerdMiner  + (1x) 10-USB Port PowerSupply

**Custom for solo-mining Dogecoin. One of the first Dogecoin NerdMiners on the market!

If you want BTC solo mining, see other listings.**

Features:

- Nerdminer V2 for Dogecoin, tested and ready to configure. Instructions below!

-Customized for Dogecoin, the only one on the market!

- Low power consumption.

- USB-C cords included.

- Easy setup.

- Defaults to doge.solopool.us

Setup:

1. Connect the Nerdminer to a USB port using a USB-C cable.

2. Open WIFI settings on your smartphone or computer and look for "DOGE_NerdMinerAP".

3. Connect your smartphone to the Nerdminer. There is no wifi password.

4. Open your web browser, then type 192.168.4.1 in the address bar, hit enter.

5. Go into Configure WIFI, enter your home network SSID, and password. Then, input your DOGE address for payout.

5. The miner will now start working once the WLAN connection is established (blue LED blinking rapidly).

***Note: These devices are not seen by the SoloPool web application. Do not rely on it for hashrate monitoring. That does not mean they aren't working. If it is blinking at a fast pace, then it is indeed working.***

They average approx 50kh/s pretty steadily with the default pool setting.

Only been tested on SoloPool.us, which offers low difficulty. Other pools that require higher difficulty settings may produce connection or hashrate issues.

Sticking with SoloPool.us is recommended.

If you must see the statistics, you can install ArduinoIDE, dependancies, and the CH340 drivers.

Within ArduinoIDE, see the Serial Monitor. As long as your board is selected, you will see its output there. See images for what it looks like.

***No returns because things like ArduinoIDE and drivers are a challenge to configure. The device itself with its easy config panel is what you're buying. All else is considered advanced activity beyond what is needed for basic functionalities.

As long as the LED is rapid blinking after configure, it is working fine.

All sales final***

Package contents:

- (10x)Nerdminer V2, customized for Dogecoin (DOGE)

- (1x) 10-USB Port PowerSupply

- Easy setup in less than a minute

*Pre-flashed and tested*