Listing is for a lot of 5 Metcal Desoldering Tip Cartridges.  This assortment of tips has an ID from 0.025" to 0.060" to desolder very small to larger diameter leads.

Included are SDC-702, SDC-703, SDC-704, SDC-705, SDC-706

These are used on the SP440 Desoldering station handpiece with the DP-CA2 Coil Assembly.

If your SDC tip cartridges are not heating, then most common problem is that the DP-CA2 coil assembly is broken and needs to be repaired or replaced.

These are New Old Stock.  Some tips have some corrosion near the tip and/or at the exit tube end, this doesn't affect the functionality.

The SDC-702 tips have a very small hole that will need to be drilled to be used, as the smallest tip cleaners will not fit until you drill them.

The last picture is to show all 20 pieces available, but only 5 pieces are included for the purchase price

Choosing the correct Series
The SP440 features high durability SDC desolder cartridges,
designed for high heat transfer, making desoldering on multi-layer
boards much easier. Desolder cartridges are available in two
temperature ranges (600 and 700 Series). A typical board usually
requires a 700 Series tip. Try a 600 Series tip first for thermally
sensitive components or small single-sided boards. 800 Series
tip cartridges are available should a higher operating temperature
be necessary. These are not recommended for general use as tip
oxidation increases at high temperatures.

D i m e n s i o n s   i n   i n c h e s
Inside           Outside         Part Number
Diameter A   Diameter B   600 Series   700 Series   800 Series
0.025"           0.055"          SDC-602       SDC-702    SDC-802
0.030"           0.060"          SDC-603       SDC-703    SDC-803
0.040"           0.070"          SDC-604       SDC-704    SDC-804
0.050"           0.080"          SDC-605       SDC-705    SDC-805
0.060"           0.090"          SDC-606       SDC-706    SDC-806



No additional parts, accessories, manuals, or cables included.



Additional item info:
  • No additional parts, accessories, manuals, or cables are included, unless specifically pictured and stated as part of the listing.
Shipping:
  • I will ship via FedEx on your account at no additional charge. (Sorry, I do Not ship UPS or DHL, as their service is not reliable in my area.)
  • Contact me for a custom shipping quote if the shipping calculator is too high.
  • If you need expedited shipping, let me know. Many times I can ship same or next day.
  • I only ship to your ebay shipping address, so make sure it is correct BEFORE you purchase an item.
Payment:
  • ebay Payments
Contact:
  • If you have any questions, please contact me directly through ebay messages.  I am more than happy to help and resolve any issues or help with technical questions.
International buyers:
  • International buyers are responsible for all Customs, Duties, Taxes, Broker, and Any Other Fees or Forms associated with Importing Items from the USA.
Returns:
  • Please double check Part Numbers, Interfaces, Software, Compatibility, and Communication Requirements BEFORE you purchase an item. 
  • Returns are ONLY accepted for Warranty and items that don't match the item description.  
  • All returns must include all original undamaged items, in resalable condition with all original packaging including manuals, warranty forms, cables, etc.
  • Please note: Warranty is Void and Returns will NOT be Accepted if Tamper Seals are Broken or Removed, or unit was connected to improper supply voltage.