Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/20 HP, Nameplate RPM 1,500, No. of Speeds 1, Voltage 230V AC, Full Load Amps 0.9 A, 3.3 Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 12 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Ring/Stud, Motor Mounting Position All Angle, Number of Shafts 1
Voltage: 230V AC
Nameplate RPM: 1,500
Motor Enclosure Design: Open Air-Over
Number of Speeds: 1
HP: 1/20
RPM Range: 1,401-1,500
Stud/Base Mtg. Pattern: 2-7/8 in x 2-7/8 in
Motor Sub Application: Direct Drive Fan/Blower
Length Less Shaft: 3 3/8 in
Hz: 60 Hz
Mounting Stud Location: 4/Both Ends
Motor Thermal Protection: Auto
Motor Service Factor: 1
Motor Bearings: Sleeve
Voltage Compatibility: 115/200-230V AC, 115/208-230V AC, 115/230V AC, 120/240V AC, 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/277V AC, 208-230/460V AC, 230V AC, 240V AC, 277/230V AC
Motor Mounting Type: Ring/Stud
No. of Speeds: 1
Shaft Dia.: 5/16 in
Max. Ambient Temp.: 40 Degrees C
Item: Direct Drive Blower Motor
Number of Shafts: 1
Motor Design: Shaded Pole
Shaft Length: 2 1/4 in
Frame: 3.3
Body Dia.: 3 5/16 in
Full Load Amps: 0.9 A
Phase: Single
Application: HVAC/R
Standards: CSA Certified, UL Recognized
Ins. Class: B
Motor Shaft Rotation: CWSE
Mounting Pattern: 2-7/8 x 2-7/8
Duty: Continuous
Motor Application: HVAC/R
Motor Shaft Design: Flat
Capacitor Required: No
Lead Length: 12 in
Usable @ 200V: No
Motor Frame Material: Steel
Weight: 3 lb
Mounting Holes: (8) #8-32
Bolt Circle Dia.: 2 7/8 in
Mounting Stud Pattern: 2 7/8 in x 2 7/8 in
Stud Size: #8-32
Motor Mounting Position: All Angle
Overall Length: 5 1/2 in
Usable @ 208V: No
Mounting: Stud
Country of Origin (subject to change): Mexico
Package Quantity: 1