1. Planetary gear set: High strength metal planetary gears, quenched treatment, high hardness, wear-resistant, reducing gear wear under long-term load, impact resistance, and less prone to tooth breakage. The planetary carrier is precision die cast, with small transmission clearance and stable output.

2. Motor stator and rotor: The 3530 motor uses high-purity silicon steel sheets and high-performance ferrite magnets, with evenly wound coils, strong power output, stable current, and excellent heat control.

3. Shell and End Cover: The gearbox shell is made of alloy material, which has good rigidity and is not easily deformed, protecting the internal gear structure; Precision machining of the end cap ensures the coaxiality of the output shaft and reduces vibration and noise.

4. Lubrication process: High temperature resistant special lubricating grease is added inside the gear for long-term lubrication, reducing gear friction noise, extending gear life, and preventing loss in high and low temperature environments.

1. Intelligent gimbal and monitoring camera rotation mechanism

2. Small automation equipment and electric control valves

3. Medical device transmission and experimental testing equipment

4. Smart home: electric curtains, lifting brackets, automatic door small modules

5. Robot joints, AGV car auxiliary drive

6. Advertising display turntable, vending machine

1. Power supply requirements: DC stabilized power supply must be used, and direct connection to AC power is strictly prohibited; The voltage deviation should not exceed ± 10% of the rated voltage, as excessive voltage can burn out the coil.

2. Load requirements: Avoid exceeding the maximum stalling torque of the motor at the moment of starting, as long-term overloading can cause gear wear and motor overheating damage.

3. Installation and fixation: Use flange holes for fixation, keep the installation surface flat, and do not forcefully bend the output shaft, which may cause internal planetary gear misalignment.

4. Environmental requirements: Cannot be used for a long time in water, high dust, and highly corrosive environments; If waterproofing is required, additional sealing modifications are needed.

5. Steering control: Swap two power cords to change the direction of motor rotation; Frequent forward and reverse working conditions, it is recommended to reserve torque margin.