*CANBUS ERROR FREE:
No. For some vehicles, it may require install decoder or load resistor（not included） to avoid turn signal hyper flash or fast blinking.
(We are also selling resistors , If you want, please feel free to contact us for a discount.)
Information:
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F 150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F 150 ,XL Crew Cab Pickup 4-Door 2.7L
For 2004 Ford F 150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F 150 ,XL Crew Cab Pickup 4-Door 2.7L
Key Features:
1. Designed to enhance your visibility and driving safety at night and bad weather.
2. Latest 4-side COB Chip light source, super bright without blind zone.
3. Efficient cooling system ensures maximum headlight performance and appropriate working temperature.
4. Built-in smart IC chip provides intelligent temperature control and allows for instant start.
5. IP67 waterproof and high temperature resistant, withstand extreme weather conditions.
6. Easy installation without any modification or additional wiring, plug and play.
Specifications:
Condition: 100% Brand New / Never Used
Bulb Socket: H7 high beam + H11 low beam
Condition: 100% Brand New
Light Source：4-Sides COB Chips
Material: Aviation 6063 aluminum profile
Color Temperature: 6000K White
Working Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
Output Power (Each): 100W/Set, 50W/ Bulb
Luminous Flux: 12000LM/Set, 6000LM / Bulb
Condition: 100% Brand New
Light Source：4-Sides COB Chips
Material: Aviation 6063 aluminum profile
Color Temperature: 6000K White
Working Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
Output Power (Each): 100W/Set, 50W/ Bulb
Luminous Flux: 12000LM/Set, 6000LM / Bulb
Waterproof Rate: IP67
Working Temperature: -40℃ - +80℃
Beam Type: High Beam/ Low Beam
Beam Angle: 360 Degrees
Lifespan: Over 50,000 hours
Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
Fitment Type: Direct Replacement
Placement on Vehicle: Front, Left, Right
Working Temperature: -40℃ - +80℃
Beam Type: High Beam/ Low Beam
Beam Angle: 360 Degrees
Lifespan: Over 50,000 hours
Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
Fitment Type: Direct Replacement
Placement on Vehicle: Front, Left, Right
Use for：High Low beam, replacement halogen, not compatible with xenon/HID
H11 Fog Light Bulbs:
Bulb Size : H11, H8, H9, H16
Color Temperature: 6000K
Voltage : DC 12-24V(fit 12V,24V vehicles)
Wattage:24W/Bulb 48W/Set (2pcs Bulbs)
Lifetime : Up to 50,000hrs
Waterproof Rate : IP67
Beam Angle : 360 degree
To Fit : Foglight
Easy installation, Direct plug, and play.
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving
Parcel Content:
4x H7+H11 Headlight bulbs
2x H11 Fog light bulbs
4x H7+H11 Headlight bulbs
2x H11 Fog light bulbs
(Random delivery of new and old packaging in the box)
Install Caution:
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Be sure to turn off the ignition and remove the key.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Be sure to turn off the ignition and remove the key.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
➤Please Note:
Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case.
➤After service Notification:
It is impossible for any product to be 100% suitable for all types of vehicles, and our products can be suitable for 99% of all types of vehicles.If you are satisfied with our product and service please leave us a positive feedback,if there is any problem when you received the package,before leaveing negative feedback please feel free to contact us,we will be definitely give you a satisfying solution.