Module 1, Gear Ratio 1:1, 90 Degree Right Angle Drive, Number of teeth 15 - 30, Bore 4mm - 12mm
Precision Straight Bevel Gear, Transmission Gear, Pinion, Motor Gear, Cogwheel, Umbrella Toothed Wheel, made of Nylon
Plastic, Blue
Note:
- Modulus is the model, on behalf of the size of the gear teeth. The larger the modulus, the larger the teeth, the more force they can withstand.
- Please use the drop down menu to select your required number of teeth and bore size.
- Bore options are not marked keyway size, the default is through-hole, there are marked keyway size is the keyway hole, attention to distinguish between the purchase.
- The bevel gears in this link are 1:1 gear ratio and can only be used in pairs with the same module and the same number of teeth.
- Nylon gear due to material problems, individual gears may have a little burr, but does not affect the actual use, if you mind, please buy with caution.
- External dimensions (e.g. step diameter, total thickness) are subject to may change according to production lot without further notice.
- If you need other sizes, shapes and quantity , you can also contact us to support custom. Professional equipment processing.
High-quality materials, exquisite craftsmanship, safe, reliable and durable, long service life, complete specifications, convenient and flexible use, and better cost performance.
Nylon gears have good mechanical and chemical properties, wear-resistant, anti-corrosion, self-lubricating, low friction coefficient, smooth transmission, low noise
Long service life: Nylon gears have good abrasion resistance, impact resistance and corrosion resistance, and can maintain efficient and reliable operation during a long time of use.
Strong load-bearing capacity: Nylon gears can withstand large loads, with high strength and hardness, suitable for heavy-duty working environment.
Small friction coefficient: Nylon gear material surface friction coefficient is small, can effectively reduce the gear contact surface wear and energy loss, improve transmission efficiency.
Ideal replacement for gears made of metal and other materials
All purchased gears are delivered with grub screws .
● Standard Part
● Material: Nylon Plastic
● Colour: Blue
● Gear ratio: 1:1
● Gear modulus (M) = 1
● Pitch (P) = 3.14mm
● Diametral Pitch (DP) = 25.4
● Pressure Angle: 20 degree
● 90 degree right angle drive
● Number of teeth (Z): 15 Tooth / 20 Tooth / 25 Tooth / 30 Tooth
● Available Bore Diameter: 4mm / 5mm / 6mm / 8mm / 10mm / 12mm (Bore options are not marked keyway size, the default is through-hole, there are marked keyway size is the keyway hole, attention to distinguish between the purchase.)
● Exact dimensions can also be viewed in the photo gallery.
● Note: Standard Manufacturers Tolerances Apply
● Material: Nylon Plastic
● Colour: Blue
● Gear ratio: 1:1
● Gear modulus (M) = 1
● Pitch (P) = 3.14mm
● Diametral Pitch (DP) = 25.4
● Pressure Angle: 20 degree
● 90 degree right angle drive
● Number of teeth (Z): 15 Tooth / 20 Tooth / 25 Tooth / 30 Tooth
● Available Bore Diameter: 4mm / 5mm / 6mm / 8mm / 10mm / 12mm (Bore options are not marked keyway size, the default is through-hole, there are marked keyway size is the keyway hole, attention to distinguish between the purchase.)
● Exact dimensions can also be viewed in the photo gallery.
● Note: Standard Manufacturers Tolerances Apply
● You can find more products in different material, type, color, sizes, quantity and shapes in our shop！ If you have special needs, please contact us, we can customize according to your needs!
● Note:
- Please allow minor errors due to manual measurement. Thank you for your comprehension.
- Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.
Package included : ( According to your choice )
