Dental Locator Abutment Attachment for Nobel Active/ITI Straumann/Zimmer/Hiossen

Models for choose:
For Nobel:

Product Description:
● Implant System Compatible With:  NOBEL Biocare NobelActive Conical  
 
Abutment Diameter: 
 
● NP Ø3.5mm Narrow Platform
● RP Ø4.3mm Regular Platform
 
Abutment Length:
● 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm

For ITI
  • 1Pc NC Ø3.3 3mm Abutment 
  • 1Pc NC Ø3.3 4mm Abutment 
  • 1Pc NC Ø3.3 5mm Abutment 
  • 1Pc RCØ4.1 3mm Abutment 
  • 1Pc RC Ø4.1 4mm Abutment 

  • 1Pc RC Ø4.1 5mm Abutment

Product Description:
● Implant System Compatible With for ITI Straumann
 
Abutment Diameter: 
 
● NC Ø3.3 Narrow Cross Fit connection
●  RC Ø4.1 Regular Cross Fit connection
 
Abutment Length:
● 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm

For Zimmer
  • 1Pc PA Ø3.5 1mm Abutment
  • 1Pc PA Ø3.5 2mm Abutment
  • 1Pc PA Ø3.5 3mm Abutment
  • 1Pc PA Ø3.5 4mm Abutment 
  • 1Pc PA Ø3.5 5mm Abutment
  • 1Pc PAØ4.5 1mm Abutment 
  • 1Pc PAØ4.5 2mm Abutment
  • 1Pc PAØ4.5 3mm Abutment
  • 1Pc PA Ø4.5 4mm Abutment 

  • 1Pc PA Ø4.5 5mm Abutment

Product Description:
● PA Ø3.5mm Implant System Compatible With:  BEGO 3.75, Zimmer, MIS, Cortex, Adin
● PA Ø4.5mm Implant System Compatible With:  Zimmer
 
Abutment Diameter: 
 
● PA Ø3.5mm Narrow Platform
● PA Ø4.5mm Regular Platform
 
Abutment Length:
● 1.0mm,2.0mm,3.0mm, 4.0mm, 5.0mm

Compatible With HIOSSEN ET III SA Fixture Mini

● 1.0 mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm

Compatible With HIOSSEN ET II/III SA Fixture Regular

● 1.0 mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm,7.0mm

 
Male Cap kits:
● Yellow Xtra-Soft Retentive Cap(0.8 lbs) 1Pcs
● Blue Strong Retentive Cap (1.2 lbs) 1Pcs
● Pink Strong Retentive Cap (2.4 lbs) 1Pcs
● Metal Housing Laboratory Processing Cap 1Pcs
● Block-Out Spacer 1Pcs

Compatible With: Dentium,Dentis, SG, Meg Zhen AO

● Dentium-1Pcs AS403-3mm Abutment
● Dentium-1Pcs AS404-4mm Abutment 
● Dentium-1Pcs   AS405-5mm Abutment
 
Locat0r Core Tool :

● 1: REMOVAL
● The male removal tip has a
pointy end useful for gripping
and removing the retainers of the
metal caps incorporated in the
overdenture.
 
● 2 : INSERTION
● The central part of the Locat0r
core tool, once detached from the
tip, has a cylindrical end specially
designed for inserting the retainers
in the metal caps.
 
● 3 : SCREWING
 
● This end of the Locat0r core tool,
acts as a driver for carrying the
locat0r abutment into the oral
cavity and as a hand driver for
fixing it to the implant.
 
● The 3 Components of the Locat0r Core Tool
● About The Locat0r Core Tool and How to Use It
● Locat0r 3-IN-1 Core Tool
 
● The Removal Tool Tip is used to engage and remove the Male from the Denture Cap.
● The Seating Tool is used to seat the Locat0r Male.
● The Anchor Driver with the Abutment Holder Sleeve carries the Abutment securely and places it onto the implant.
● Very Easy to Use. Follow these steps to utilize the 3-in-1 Locat0r Core Tool:
 
● Loosen the Removal End of the Core Tool. You will see a visible gap between the removal tool and seating tool.
● Insert the Removal Tool Tip into the Denture Assembly and push straight into the Male. Tilt the tool so that the sharp edge of the tip 
● will grip the Male and pull it out of the Denture Cap.
● Once the Male is removed proceed to point the tool down and away from you. Tighten the Removal Tool Clockwise back onto the 
● Core Tool. This will disengage the Male from the tip of the Removal Tool
● Separate the Removal Tool part of the Locat0r Core Tool. Use the Seating Tool to place a new Male into the empty Denture Cap

FDA Statement

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. 

Seller's name: dent-inus 

City State: Zhengzhou, Henan China 

Telephone number：+86371-68618288

Datacaciques