•  
  •  
  • When you need to replace the cv axle?
  •  
  • 1. A clicking or popping noise that you can hear while riding,This noise is most likely heard during tight corners or taking tight turns.
  • 2. Check the boots and cv joints for wear or breaks.
  • 3. You feel a vibration or shaking when riding
  •  
  • Steps To Remove CV Axle
  • 1. Remove the hub cap or center cap from the wheel.
  • 2. Remove the cotter pin from axel nut
  •  
  • 3.Use a breaker bar and socket to loosen the hub nut. Once you break the hub nut loose, you can use a ratchet and socket to remove it.
  • CV Axle Assembly for Honda Accord 1998-2002 Front Left L4 2.3L Automatic trans

     

     

    When you need to replace the cv axle?

     

    1. A clicking or popping noise that you can hear while riding,This noise is most likely heard during tight corners or taking tight turns.

    2. Check the boots and cv joints for wear or breaks.

    3. You feel a vibration or shaking when riding

     

    Steps To Remove CV Axle

    1. Remove the hub cap or center cap from the wheel.

    2. Remove the cotter pin from axel nut

     

    3.Use a breaker bar and socket to loosen the hub nut. Once you break the hub nut loose, you can use a ratchet and socket to remove it.

    4.Remove the brake caliper and remove hub

    5.Unbolt the hub from the strut tower

    6.Hammer the outer CV joint and gently tap the joint until it is removed from the hub.

    7.Remove the CV axle from the vehicle

    Steps To Install CV Axle 

    8.Get the new axle and line up the splines with the differential before pushing the new axle into place. It’s a good idea to grease up the splines on the the new axles before installing

    9.Reinsert the axle through the hub assembly.

    10.Install the axle into knuckle 

    10.Reinstall the cap screw and hub nut and brake caliper

      


    Item Specifics
    Brand :PMT2018
    Manufacturer Part Number :PMT17993318CN
    Interchange Part Number :66-4151
    Manufacturer Warranty :1 Year
    Superseded Part Number :664151,44306S4KA12,44306S4KA60
    California Prop 65 Warning :Yes
    Fitment Type :Direct Replacement
    Compatible Makes :Honda
    Model :Accord
    Year :1998-2002
    Engine :L4 2.3L
    Location :Front Left(Front Driver Side)
    Compressed Length (IN) :39.5625 in
    Input Shaft Spline Count :27
    Output Shaft Spline Count :28
    Note :Automatic trans

    Payment

     1. If you want to change the shipping address, please contact us by eBay messages.

    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    3.Payment must be received within 10 days as auction ended or order might be delayed.

    Shipping

    1. Items will be shipped within 24 hours after getting your verified payment.

    2. 2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time

    Returns

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    Feedback

    We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can refer to us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.

    Shop Category
    Picture
    CV Axle Assembly for Honda Accord 1998-2002 Front Left L4 2.3L Automatic trans

     

     

    When you need to replace the cv axle?

     

    1. A clicking or popping noise that you can hear while riding,This noise is most likely heard during tight corners or taking tight turns.

    2. Check the boots and cv joints for wear or breaks.

    3. You feel a vibration or shaking when riding

     

    Steps To Remove CV Axle

    1. Remove the hub cap or center cap from the wheel.

    2. Remove the cotter pin from axel nut

     

    3.Use a breaker bar and socket to loosen the hub nut. Once you break the hub nut loose, you can use a ratchet and socket to remove it.

    4.Remove the brake caliper and remove hub

    5.Unbolt the hub from the strut tower

    6.Hammer the outer CV joint and gently tap the joint until it is removed from the hub.

    7.Remove the CV axle from the vehicle

    Steps To Install CV Axle 

    8.Get the new axle and line up the splines with the differential before pushing the new axle into place. It’s a good idea to grease up the splines on the the new axles before installing

    9.Reinsert the axle through the hub assembly.

    10.Install the axle into knuckle 

    10.Reinstall the cap screw and hub nut and brake caliper

      

    Item Specifics
    Brand :PMT2018
    Manufacturer Part Number :PMT17993318CN
    Interchange Part Number :66-4151
    Manufacturer Warranty :1 Year
    Superseded Part Number :664151,44306S4KA12,44306S4KA60
    California Prop 65 Warning :Yes
    Fitment Type :Direct Replacement
    Compatible Makes :Honda
    Model :Accord
    Year :1998-2002
    Engine :L4 2.3L
    Location :Front Left(Front Driver Side)
    Compressed Length (IN) :39.5625 in
    Input Shaft Spline Count :27
    Output Shaft Spline Count :28
    Note :Automatic trans


     1. If you want to change the shipping address, please contact us by eBay messages.

    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    3.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Items will be shipped within 24 hours after getting your verified payment.

    2. 2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can refer to us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.


    All rights reserved.