Specification:
100% quality assurance tested, more responsive, less expensive, easier to install.
Feature a "U-Cut-to-Fit" outer housing and stainless inner wire.
Designed with a specially extruded liner for the extended life of the cable.
Equipped with aluminum fittings and aluminum ferrules to eliminate fraying.
Designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation.
Application:
Fit for Carbureted,
For 86-93 Ford Mustang 302 5.0L.
Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with below to match your needs.
Material & Color:
Material: made of high quality Stainless Steel and Aluminum.
Color: as picture.
Package Included:
1x Throttle Cable;
1x Wrench. (100% Brand New Never Used Or Installed)
Installation Instructions:
Before beginning the installation, disconnect the negative battery cable and use wheel chocks to block the vehicle's wheels.
The hole in the firewall must line up with the hole in the upper arm on the Throttle Pedal. Determine exactly where the Throttle Cable needs to pass through the firewall.
Remove the carb end assembly. Pull the inner wire out of the cable housing.
Insert the firewall fitting through the firewall from the engine side.
Insert the throttle cable adjuster into the Cable Mounting Bracket. NOTE:There must be some slack to allow for engine movement.
Reinstall the inner wire into the cable housing from inside the passenger compartment. Connect the clevis (or the ball end if the clevis was removed) to the Throttle Pedal.
Attach the carb end assembly to the throttle arm. Tighten the nut.
Cut the inner wire off so that roughly 1" of the inner wire will remain inside the carb end assembly.
Insert the inner wire into the carb end assembly. Pull all the slack out of the inner wire and tighten the set screw in the carb end assembly.
Check for proper operation of the throttle (and Kickdown if equipped) and adjust as necessary. Make sure there is no binding in the throttle linkage and that the throttle returns to the closed position when the pedal is released.
Specification:
100% quality assurance tested, more responsive, less expensive, easier to install.
Feature a "U-Cut-to-Fit" outer housing and stainless inner wire.
Designed with a specially extruded liner for the extended life of the cable.
Equipped with aluminum fittings and aluminum ferrules to eliminate fraying.
Designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation.
Application:
Fit for Carbureted,
For 86-93 Ford Mustang 302 5.0L.
Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with below to match your needs.
Material & Color:
Material: made of high quality Stainless Steel and Aluminum.
Color: as picture.
Package Included:
1x Throttle Cable;
1x Wrench. (100% Brand New Never Used Or Installed)
Installation Instructions:
Before beginning the installation, disconnect the negative battery cable and use wheel chocks to block the vehicle's wheels.
The hole in the firewall must line up with the hole in the upper arm on the Throttle Pedal. Determine exactly where the Throttle Cable needs to pass through the firewall.
Remove the carb end assembly. Pull the inner wire out of the cable housing.
Insert the firewall fitting through the firewall from the engine side.
Insert the throttle cable adjuster into the Cable Mounting Bracket. NOTE:There must be some slack to allow for engine movement.
Reinstall the inner wire into the cable housing from inside the passenger compartment. Connect the clevis (or the ball end if the clevis was removed) to the Throttle Pedal.
Attach the carb end assembly to the throttle arm. Tighten the nut.
Cut the inner wire off so that roughly 1" of the inner wire will remain inside the carb end assembly.
Insert the inner wire into the carb end assembly. Pull all the slack out of the inner wire and tighten the set screw in the carb end assembly.
Check for proper operation of the throttle (and Kickdown if equipped) and adjust as necessary. Make sure there is no binding in the throttle linkage and that the throttle returns to the closed position when the pedal is released.
1.Handling time: 1 business day (Orders are not processed on weekends & holidays)You can log on to eBay to check your logistics tracking number.
2.Please confirm address before purchase,tracking information will be sent once item is shipped.
eBay Immediate Payment via PayPal. Please purchase and pay for the item through the eBay auction.
If our product does not work properly for you and you want to exchange another one or get a refund, please confirm with our customer service first and list the product detailed problems.
We keep our promises that we will provide you with the best solution within 24 hours.
1. Congratulations and thank you for purchasing our item. All products are quality checked. They are new and in good condition when shipped to you. We are convinced you will be satisfied with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 30 days of delivery date and item must be in new condition, not worn or altered in any way with attached tags & wrap.
3.Return item must be well packed in manufacturer’s packing and contain everything that was originally provided such as packing materials, hardware, manuals, protective wrap/caps, instruction, etc.
4.Be sure to write down the package tracking number. If your return is lost or damaged during shipping, we cannot refund you because the item cannot be resold or returned to our supplier. You will have to submit a claim directly to your shipping company requesting compensation.
1.Wish you are favor of your item bought from us,and look forward to serving you again.
2.Since your feedback is very important to our business's development,we sincerely invite you to leave positive feedback to us basing on your satisfaction with our commodity and service.
3.If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.