








Features:
1.The tail spoiler wing consists of three parts, Length can be cut, 45-53 inches, suitable for most cars, can be installed in the tail.
2.Rear spoiler adds a unique and smooth edge to your car,giving off a stylish look,allowing you to have a pleasant driving experience.
3.The spoiler is designed with a 135° bevel, which can reduce wind resistance more effectively, increase grip-ability, and make your car run more stably.
4.The rear trunk spoiler wing is punch-Free Installation and it will not damage the car body.
5.It is made of high-quality PU material, and the strong double-sided adhesive used for installation makes it durable and not easy to fall off
1.Clean up the surface with the adhesion promoter
2.Tear off the tape and secure the middle part
3.Align the card slot and subtract the excess
4.Tear off the tape at the interface and insert the card slot
5.Press firmly to make it stick
6.Install the other part in the same way and complete the installation
Kindly Note:
Measure the length of the rear wing of the car and cut the product according to the length of the rear wing;
1. Simulated installation
Don't tear off the adhesive first, place the product on the car and compare and adjust it to the accurate position.
2 Surface treatment
(1) Cleaning
Use a towel dipped in alcohol or clean the vehicle body with clean water in the area that needs to be installed.
(2) Precautions
Before installation, the vehicle body must be kept dry and free of dust, oil, and wax. When the temperature is below 15 degrees Celsius, it is necessary to heat the adhesive on the vehicle body and product. (Heating with a hair dryer is sufficient)
(3) Installation
Tear off a corner of the protective film on the back of the product, leave the film on the outside to match the installation position, and then slowly remove and press the film.
(4) Protection period
Within 48 hours after the installation of the product (at the adhesive position), it should not come into contact with water, oil, or large dust
Note:
1.Please allow some color and measurement errors due to manual and monitor factors.
Specifications:
Material: PU
Size: 1.18-1.38M Adjustable(The product can be trimmed to fit the rear of the car in its own curvature)
Color: Glossy black
Fitment: Fit most of SEDAN
NOT FIT FOR Hatchback / SUV / Wagon Models
Position: Car Spoiler
Package Included:
1 * Rear Trunk Spoiler Wing& Tape
1* Installation instruction

