0-100 Psi Pressure Transducer Sender Sensor 0.5V-4.5V For Oil Fuel Air Water USA
0-100 psi Transducer Sensor
Feature:
1) All parts are hand inspected off the line before packaging and once again by our team before shipment.
2) According to the original factory specifications.
3) Perfect match for the original car.
4) Easy installation.
5) Stable characteristics, high reliability.
6) Aftermarket Products with Premium Quality.
Please check your part number or photos before purchasing !
Part Number :
1) All parts are hand inspected off the line before packaging and once again by our team before shipment.
2) According to the original factory specifications.
3) Perfect match for the original car.
4) Easy installation.
5) Stable characteristics, high reliability.
6) Aftermarket Products with Premium Quality.
Please check your part number or photos before purchasing !
Part Number :
0-100 psi
Fits For :
Pressure Range: 0-100 psi
Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V
Working Temperature: -40—+125oC;.
Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
Accuracy: ±1%FS;
Thread: 1/8”-27 NPT.
Overload Capacity: 2 times;
Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;
Load Resistance: ≤(supply power-6.5V/0.02A)Ω;
Long-term stability: ± 0.2%FS/year;
Temperature Effect on Zero: Typical: ±0.02%FS/oC; Maximum: ±0.05%FS/oC;
Temperature Effect on Sensitivity: Typical: ±0.02%FS/oC; Maximum: ±0.05%FS/oC;
Shock Resistance: 100g;
Anti-Shock: ≤±0.01%FS(X,Y,Z axes, 200Hz/g);
Response Time: ≤1ms;
Insulation Resistance: >100mΩ 500VDC;
Explosion-proof Class: ExiaTTCT6;
Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC61000-4-3;
Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for IN+. Black for GND. Green for OUT.
It is an advance pressure sender than traditional mechanical pressure sender.
Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V
Working Temperature: -40—+125oC;.
Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
Accuracy: ±1%FS;
Thread: 1/8”-27 NPT.
Overload Capacity: 2 times;
Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;
Load Resistance: ≤(supply power-6.5V/0.02A)Ω;
Long-term stability: ± 0.2%FS/year;
Temperature Effect on Zero: Typical: ±0.02%FS/oC; Maximum: ±0.05%FS/oC;
Temperature Effect on Sensitivity: Typical: ±0.02%FS/oC; Maximum: ±0.05%FS/oC;
Shock Resistance: 100g;
Anti-Shock: ≤±0.01%FS(X,Y,Z axes, 200Hz/g);
Response Time: ≤1ms;
Insulation Resistance: >100mΩ 500VDC;
Explosion-proof Class: ExiaTTCT6;
Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC61000-4-3;
Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for IN+. Black for GND. Green for OUT.
It is an advance pressure sender than traditional mechanical pressure sender.
(Before placing an order, please make sure that your OE part number is the same as our description, and your old part is the same as our picture.)
Package Included :
1 X Sensor, As Pictured
Please Note ：
1. Please compare the part number withathe original part number before purchasing!
2. Please check our pictures carefully to ensure that the photos displayed are the same as you need.
3. Due to incompatibility, we will not bear your installation fee/return shipping fee!
4. If the parts does not work properly, please contact our customer service, we will solve it for you in the best way.
5. Without communication, please do not let us leave 1-3 stars and any negative/neutral feedback.
2. Please check our pictures carefully to ensure that the photos displayed are the same as you need.
3. Due to incompatibility, we will not bear your installation fee/return shipping fee!
4. If the parts does not work properly, please contact our customer service, we will solve it for you in the best way.
5. Without communication, please do not let us leave 1-3 stars and any negative/neutral feedback.
