3-ply project panel is assembled with smooth, patch-free mahogany veneer applied to only the face side of this panel; the back of the panel is not intended to be exposed

• PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time

• Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants

• The decorative top veneer, measuring approximately 1/50" thick, exhibits the beauty and timeless quality of natural hardwood and is suitable for painting or staining

• Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood

• Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only

• For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade

• Common: 1/4 in. x 2 ft. x 4 ft.; Actual: 0.203 in. x 24 in. x 48 in.

• Direction of the grain is the length of panel

• Each panel weighs approximately 6 lbs.

• Grade: B-4 - See Grading Guide for additional information

• Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Poplar, Red Oak, Walnut, and White Oak

• Return Policy

•

•