Features:
1.The product is made of high quality material, quality is guaranteed
2. The product design is compact and convenient, can be used anytime, anywhere, easy to operate
3. This EC meter integrates three in one: measuring the fertilizer concentration in water (EC), measuring the temperature in water, measuring the impurity content in water (TDS), which is widely used and also a product for water cluster enthusiasts
4. Temperature automatic compensation meter in the measurement mode, with automatic temperature compensation function
5. High accuracy, easy to read with backlight, easy to understand the value at a glance.
EC meter introduction:
Conductivity meter, also known as EC meter, three-in-one multi-purpose, can be measured: the concentration of fertilizer in the water, the water impurity content, the temperature of the water. the emergence of the EC meter is now the gospel of the hydroponic vegetables enthusiasts, with it, never again like our first stir-fried vegetables, to the next salt when I don't know how much salt to put enough flavor. Now, soilless culture from now on to say goodbye to the water in the concentration of fertilizer ambiguous times, with accurate fertilization, can let you from will not be hydroponic planting easier to master hydroponics planting technology requirements, so that hydroponics planting success rate is greatly improved, but also improve your hydroponics planting harvest, to increase your interest in hydroponics planting. In addition to be used in hydroponic vegetables, can also be used in aquaculture fish, shrimp, family drinking water source detection.
EC meter is to measure the concentration of fertilizer content in the water, the lower the value shows, the lower the fertilizer content, the higher the value shows, the higher the fertilizer content, the more plants need different fertilizer concentration of each growth period, is from low to high (light to thick) of the increment.
The EC value of fertilizer required for each growth period of leafy vegetables:
Early stage (6 to 15 days after germination) EC value: 0400
Mid-phase (16 to 25 days after germination) EC: 1200
Late stage (26 to 45 days after germination) EC: 2100
Note: A difference of 0-150 between the EC values of each growth period is normal.
Multi-functional testing pen instructions for use.
Before using, please unplug the electrode protective sleeve;
Press the ON/OFF key and put the electrode into the solution to be tested;
When the value is stabilized, press the HOLD button to take out the reading;
After reading, press the ON/OFF key, wipe the electrode clean and put the electrode protective sleeve into it.
Instrument features lock function: easy to read and record, the instrument will lock the readings; 5 minutes automatic shutdown function, the battery will not run out of power.
Product measurement range:
Conductivity:0-9999us/cm
TDS:0-9999ppm
Celsius:0.1-80.0°C
Fahrenheit: 32.0-176.0℉
Accuracy: ±2%
Caution:
TDS&EC Conductivity Switching: The meter factory displays TDS value, if you want to measure the solution conductivity, please gently touch the SHIFT key, the meter will switch automatically;
Touch SHIFT key for 2 consecutive times, Celsius degree Fahrenheit switch, the instrument factory default Celsius degree;
Keep the electrode clean, cover the electrode protective sleeve, if not used for a long time, please remove the battery .
Shipping list:
Tester X1