|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front Rear Brake Rotors Ceramic Pads For Jeep Patriot Compass 4WD 2009 - 2016
Specification:
Brand:sinwonparts
Fitment:
2013-2014 Chrysler 200(FWD,295mm Front Disc,Models With 10.31" (262mm) Outer Diameter Rear Disc Only,Models With 302mm Rear Rotors)
2013-2014 Chrysler 200(FWD,295mm Front Disc,Models With 262mm Rear Disc Models,Models With 302mm Rear Rotors)
2011-2012 Chrysler 200(FWD,Models With 10.31" (262mm) Outer Diameter Rear Disc Only,Models With 302mm Rear Rotors)
2011-2012 Chrysler 200(FWD,Models With 262mm Rear Disc Models,Models With 302mm Rear Rotors)
2007-2010 Chrysler Sebring( Models w/262mm Rear Disc Only)
2007&2010 Chrysler Sebring(FWD, w/262mm Rear Disc Only)
2007-2009 Chrysler Sebring(FWD,2.7L or 2.4L Models w/262mm Rear Disc Only)
2010-2010 Chrysler Sebring(FWD,Models with 262mm Rear Disc ONLY,)
2008-2009 Chrysler Sebring(Models With 262mm Rear Disc Models)
2010-2010 Chrysler Sebring(w/262mm Rear Disc Only)
2008-2009 Chrysler Sebring(with 262mm Rear Disc ONLY,With Rear Disc, FWD,)
2013-2014 Dodge Avenger(FWD,295mm Front Disc,Models With 262mm Rear Rotors,Models With 295mm Front Rotors And 302mm Rear Rotors)
2010-2010 Dodge Avenger(FWD,Models w/262mm Rear Disc Only,)
2010-2010 Dodge Avenger(FWD,Models w/262mm Rear Disc Only,Models With 302mm Rear Rotors)
2012-2012 Dodge Avenger(FWD,Models With 262mm Rear Disc Models,Models With 302mm Rear Rotors)
2010-2010 Dodge Avenger(FWD,Models with 262mm Rear Disc ONLY,)
2011-2012 Dodge Avenger(FWD,Models With 262mm Rear Rotors,Models With 302mm Rear Rotors)
2010-2010 Dodge Avenger(FWD,SXT Models w/262mm Rear Disc Only)
2008-2010 Dodge Avenger(Models w/262mm Rear Disc Only,Models With 302mm Rear Rotors)
2013-2014 Dodge Avenger(Models With 262mm Rear Rotors,Models With 295mm Front Rotors And 302mm Rear Rotors)
2011-2011 Dodge Avenger(Models With 262mm Rear Rotors,Models With 302mm Rear Rotors)
2010-2010 Dodge Avenger(SXT Models w/262mm Rear Disc Only,)
2009-2009 Dodge Avenger(With Rear Disc, FWD, w/262mm Rear Disc Only,)
2009-2009 Dodge Avenger(With Rear Disc, FWD, with 262mm Rear Disc ONLY,)
2008-2009 Dodge Avenger(With Rear Disc, FWD,SXT Models w/262mm Rear Disc Only)
2012-2012 Dodge Caliber(FWD, Models with Rear Disc Brakes ONLY,)
2010-2010 Dodge Caliber(FWD, Models with Rear Disc Brakes ONLY,Models with Rear Disc Brakes)
2012-2012 Dodge Caliber(Models with Rear Disc Brakes ONLY,)
2007-2007 Dodge Caliber(w/262mm Rear Disc Only (Will Not Fit SRT-4)
2009-2009 Dodge Caliber(w/262mm Rear Disc Only (Will Not Fit SRT-4),excluding Turbo Models,w/262mm Rear Disc Only (Will Not Fit SRT-4)
2009-2009 Dodge Caliber(w/262mm Rear Disc Only (Will Not Fit SRT-4),FWD,)
2008-2009 Dodge Caliber(w/262mm Rear Disc Only (Will Not Fit SRT-4),With Rear Drum,w/262mm Rear Disc Only (Will Not Fit SRT-4)
2008-2008 Dodge Caliber(with 262mm Rear Disc ONLY (Will NOT fit SRT-4),With Rear Drum)
2007-2007 Dodge Caliber(With Rear Disc, FWD, w/262mm Rear Disc Only (Will Not Fit SRT-4)
2007-2007 Dodge Caliber(With Rear Disc, FWD, with 262mm Rear Disc ONLY (Will NOT fit SRT-4),)
2008-2008 Dodge Caliber(With Rear Disc, FWD,w/262mm Rear Disc Only (Will Not Fit SRT-4),With Rear Drum,w/262mm Rear Disc Only (Will Not Fit SRT-4)
2010-2010 Dodge Caliber(With Rear disc,Models With Rear Disc Brakes)
2007-2008 Jeep Compass(4WD)
2015-2015 Jeep Compass(4WD, 262mm Rear Disc)
2016-2016 Jeep Compass(4WD, 262mm Rear Disc, 294mm Front Disc,4WD,Models With 302mm Rear Rotors)
2016-2016 Jeep Compass(4WD, 262mm Rear Disc, 294mm Front Disc,Models With 302mm Rear Rotors)
2009-2015 Jeep Compass(4WD, 262mm Rear Disc,Models With 302mm Rear Rotors)
2017-2017 Jeep Compass(4WD, mfrbodycodename: MK, 262mm Rear Disc, 294mm Front Disc,With Rear Disc, 4WD, 262mm Rear Disc,Models With 302mm Rear Rotors)
2008-2008 Jeep Compass(Models with 10.3" (261mm) Diameter Rotors,)
2016-2016 Jeep Compass(Models with 262mm Rear Disc ONLY)
2009-2009 Jeep Compass(Models with 262mm Rear Disc Only,Models With 302mm Rear Rotors)
2007-2008 Jeep Patriot
2016-2016 Jeep Patriot(262mm Rear Disc,Models With 302mm Rear Rotors)
2007-2007 Jeep Patriot(4WD)
2009-2016 Jeep Patriot(4WD, 262mm Rear Disc,Models With 302mm Rear Rotors)
2017-2017 Jeep Patriot(4WD, 262mm Rear Disc,With Rear Disc, 4WD, 262mm Rear Disc,Models With 302mm Rear Rotors)
2009-2013 Jeep Patriot(Models with 262mm Rear Disc Only,Models With 302mm Rear Rotors)
2008-2008 Jeep Patriot(With Rear Disc, 4WD)
2015-2015 Mitsubishi Lancer(FWD,Models With Rear Disc,With Rear Drum)
2012-2012 Mitsubishi Lancer(FWD,With Rear Disc Only,With Rear Disc,GT & SE Models ONLY!)
2012-2012 Mitsubishi Lancer(FWD,With Rear Disc Only,With Rear Drum, FWD,GT & SE Models ONLY!)
2012-2012 Mitsubishi Lancer(With Rear Disc Only,FWD)
2016-2016 Mitsubishi Lancer(With Rear Disc, AWD,With Rear Disc,GT Models Only)
2013-2013 Mitsubishi Lancer(With Rear Disc, FWD)
2015-2015 Mitsubishi Lancer(With Rear Disc, FWD,Models With Rear Disc,GT Models Only)
2011 2014 2016 Mitsubishi Lancer(With Rear Disc, FWD,With Rear Disc)
2013-2014 Mitsubishi Lancer(With Rear Disc, FWD,With Rear Disc,GT & GT Sportback Models ONLY!)
2011-2011 Mitsubishi Lancer(With Rear Disc, FWD,With Rear Drum)
2014-2014 Mitsubishi Lancer(With Rear Disc, FWD,With Rear Drum, FWD)
NOTE:
Brake pads are a normal wear item on your vehicle. That means they are designed to wear down and be replaced. If you have disc brakes on your vehicle, this is a very manageable task and only requires a few tools.
Essentially, hydraulic pressure forces a piston against the brake pads set inside the brake caliper. The caliper is free floating so that the pressure from the pads is evenly applied to each side of the brake rotor to slow or stop the wheel. The rotor is connected to and spins with the wheel and hub. The friction of repeated stopping will wear down the brake pads. The rotor wears as well, but the pads wear much faster.
If you notice any squealing or scraping noises while driving your vehicle and applying your brakes, that is a good sign that your pads are worn and in need of replacement. You might also hear squealing or scraping sounds while NOT applying the brakes and when you apply the brake, the noises stop. That is also an indicator of worn or misaligned pads.
Before starting, make sure your vehicle is parked on a flat level surface and you have your parking brake set. This is to make sure your vehicle doesn't roll off the jack which could be quite dangerous. If you do not have a floor jack or a breaker bar that fits your wheel's lug nuts, you can use the scissor jack and tire iron that came with your vehicle...they will work just fine for this. If you do use a breaker bar with a socket, make sure it is the correct size for the lug nuts otherwise you could round off the corners and make removal difficult. I do recommend buying a set of jack stands in either case because they are pretty cheap and provide much more safety for you when your vehicle is elevated off of the ground.
Before jacking up the vehicle, you can use your tire iron or breaker bar to break loose the lug nuts on the wheel. This is much easier and safer while the car is firmly on the ground because it might require a decent amount of force to loosen them. If you have difficulty, try to position yourself to use your own body weight to help loosen the lug nuts.
Using your floor jack or scissor jack, elevate the vehicle using the jack points defined in your vehicle manual. Once the wheel is clear of the ground, place your jack stand in position to support the vehicle. If you are using a hydraulic floor jack, you MUST use a jack stand as the floor jack will tend to "sink" over time. A scissor jack is less likely to move, but I still recommend jack stands...better safe than sorry.
With the wheel safely off the ground, go ahead and remove the lug nuts. After they are removed, you can slide the wheel off of the hub and set it aside. You now have access to the rotor and brake caliper.
| Item Specifics | |
|---|---|
| Brand | sinwonparts |
| Manufacturer Part Number | sinwon803927 |
| Placement on Vehicle | Front,Rear,Left,Right |
| Warranty | 2 Year |
| Material | G3000 Rotor Casting |
| Pads Material | Ceramic |
| Fitment Type | Direct Replacement |
| Items Included | 4X Discs/Rotors 8X Pads |
| Interchange Part Number | 53038,53036,brake disk,Front and Rear |
| Solid Or Vented Rotor | Vented |
| Solid Or Vented Rotor(Rear) | Solid |
| Benifits | Comfortable and Quiet Green and Dustless |
| Brake Pad Compound | Ceramic Low Dust Formula |
| Shim Attachment Type | Staked |
| Rotor Style(Front) | Drilled & Slotted |
| Rotor Style(Rear) | Slotted |
| Rotor Outside Diameter(Rear) | 10.25in. (260.3mm) |
| Rotor Outside Diameter(front) | 11.5 in (292.1 mm) |
| Front Center Hole Diameter(mm) | 69.1 |
| Rear Center Hole Diameter(mm) | 80 |
| Bolt Hole Quantity(Rear) | 5 |
| Bolt Hole Quantity(Front) | 5 |
| Discs Overall Height | 46 mm |
| Rear Discs Overall Height | 60.2 mm |
| Front Brake rotor thickness(mm) | 26 |
| Rear Brake rotor thickness(mm) | 10 |
| Other Part Number | brake pads and rotors kit;driver and passenger |
| Superseded Part Number | P-1285,P-1037 Ceramic brake pads;discs replacement slotted |

Shop Category Excellent Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Front Rear Brake Rotors Ceramic Pads For Jeep Patriot Compass 4WD 2009 - 2016
Front Rear Brake Rotors Ceramic Pads For Jeep Patriot Compass 4WD 2009 - 2016
Specification:
Brand:sinwonparts
Fitment:
2013-2014 Chrysler 200(FWD,295mm Front Disc,Models With 10.31" (262mm) Outer Diameter Rear Disc Only,Models With 302mm Rear Rotors)
NOTE:
Brake pads are a normal wear item on your vehicle. That means they are designed to wear down and be replaced. If you have disc brakes on your vehicle, this is a very manageable task and only requires a few tools. If you notice any squealing or scraping noises while driving your vehicle and applying your brakes, that is a good sign that your pads are worn and in need of replacement. You might also hear squealing or scraping sounds while NOT applying the brakes and when you apply the brake, the noises stop. That is also an indicator of worn or misaligned pads. Before jacking up the vehicle, you can use your tire iron or breaker bar to break loose the lug nuts on the wheel. This is much easier and safer while the car is firmly on the ground because it might require a decent amount of force to loosen them. If you have difficulty, try to position yourself to use your own body weight to help loosen the lug nuts. Using your floor jack or scissor jack, elevate the vehicle using the jack points defined in your vehicle manual. Once the wheel is clear of the ground, place your jack stand in position to support the vehicle. If you are using a hydraulic floor jack, you MUST use a jack stand as the floor jack will tend to "sink" over time. A scissor jack is less likely to move, but I still recommend jack stands...better safe than sorry. With the wheel safely off the ground, go ahead and remove the lug nuts. After they are removed, you can slide the wheel off of the hub and set it aside. You now have access to the rotor and brake caliper.
☆ We will only ship to the confirmed shipping address given with the payment.
☆ Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
☆ All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
☆ We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
☆ The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
☆ We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
☆ We stand behind every product we sell.
☆ All of our brand new items come with a 30-Days money-back guarantee.
☆ We define the item as defective only if it doesn't function as described.
☆ It is the buyer's responsibility to understand the item description before bidding.
☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
☆ Man-made damage by abuse or wrong operation is not covered by this warranty.
☆ No product liability insurance is assumed.
☆ We are always been trying to provide best service and reliable products for every customer.
☆ If you are satisfed with the product you recieved, please have a good share.
☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to reslove any problem for you.
SINWONPARTS All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||