Elbow 90 Degree Nylon Fuel Line Quick Connect Release Hose
--------------------------
Item Description
--------------------------
The quick connector allows you to quickly connect the fuel lines by pushing-in and disconnect female/male parts by pull while pressing the lock buttons. It is made of quality materials compatible with fuel/gas/petrol etc. The quick connectors do not have shutoff feature when disconnecting. They are compliant with SAE automotive standards.
Item Description
--------------------------
The quick connector allows you to quickly connect the fuel lines by pushing-in and disconnect female/male parts by pull while pressing the lock buttons. It is made of quality materials compatible with fuel/gas/petrol etc. The quick connectors do not have shutoff feature when disconnecting. They are compliant with SAE automotive standards.
Please select part from the listing dropdown options.
Essential Parameters:
Shape: e.g. Straight, 90-Degree Elbow etc
Type: e.g. Male, Female, Tee etc
Essential Parameters:
Shape: e.g. Straight, 90-Degree Elbow etc
Type: e.g. Male, Female, Tee etc
Connector Outside Diameter: the diameter of the smooth end that connects to the female piece, typically 6.30mm (SAE 1/4"), 7.89mm (SAE 5/16"), 9.49mm (SAE 3/8"), 9.89mm (SAE 10mm), 11.8mm (SAE 12mm), 12.61mm (SAE 1/2"), 15.82mm (SAE 5/8") etc.
Barb Size: the hose inside diameter (ID) that the barb can insert to, e.g. ID=6mm (or 1/4" inch) nylon hose
*If you need more quantities than listed please feel free to contact us.
Please be sure to check out the listing images and the size chart below for additional information on the part. Note if you wish to form a pair with 1 female and 1 male, the connector size of the female and male piece must be exactly the same.
Specification：
Body Material: PA12+30GF
O-Ring Material: FKM
Max Back Pressure: 500 KPa/5 Bar
Temperature: -40C-115C (-40F-239F)
Body Material: PA12+30GF
O-Ring Material: FKM
Max Back Pressure: 500 KPa/5 Bar
Temperature: -40C-115C (-40F-239F)
Hose Connection
The barb end of the quick connector connects to Nylon or Rubber hoses. As nylon hose connections are very tight (typically hose clamp is not used), you may need a compression tool to insert the barb to the hose. For rubber hose, you may need to use a hose clamp to fasten
The barb end of the quick connector connects to Nylon or Rubber hoses. As nylon hose connections are very tight (typically hose clamp is not used), you may need a compression tool to insert the barb to the hose. For rubber hose, you may need to use a hose clamp to fasten
 Installation instructions： Normally, the quick connect is connected to Nylon or Rubber hoses. Refer to the following general description for connection examples.  |