Description

An ingenious idea for making your home more secure.

This pack gives a one-stop answer to all your worries, from family emergencies to possible home break-ins. Seniors and children who are alone at home can also use the smart button to submit a request for assistance.

With the EZVIZ 4 Piece Home Sensor Kit, you can always be aware of what is going on at home. Includes home gateway, PIR sensor, open/close sensor, and smart button.

Features

Home Hub / Gateway The primary point of connectivity is the A3 Gateway. Through the all-in-one EZVIZ App, you can control, arm, and get alerts from all your linked sensors. To increase the level of security, you may also buy additional sensors3.

Motion Sensor Install the PIR motion sensor in a room, and then use the pet shield that is provided in the box to partially cover the sensor and adjust the detecting range. By doing this, you can prevent it from notifying you each time your pet enters the room, instead just alerting you when human activity is detected.

Open/Close Sensor Forget about repeatedly checking to make sure windows, doors, and closets are shut. The home gateway will sound a blaring alarm and send a mobile alert to your phone instantly if someone attempts a forced entry.

Smart Button You may activate and deactivate your complete sensor network with the smart button, or you can press it to activate an emergency alarm. Place it anyplace within your reach using the peel-and-stick technique; you can even carry it in your pocket4.

Designed With A Smart Home In Mind For increased security, connect your EZVIZ cameras2 with your sensor kit. When the sensor notices an action, the camera can start automatically recording for 5 seconds if you use a local storage card or have an EZVIZ CloudPlay subscription5. The sensor system may also be voice-activated using Google Assistant or Amazon Alexa.

What’s In The Box?

1The Home Gateway is not battery-powered and needs to be connected to a power outlet. The sensors and the button are battery-powered with included cell batteries.

2This sensor kit can only integrate with wired EZVIZ cameras launched with version 5.3.4 or later firmware. Please contact the support team to confirm any other camera’s compatibility.

3The A3 Gateway can connect up to 32 battery-powered devices. Currently, only the three sensor models included in this kit can be connected to the A3 Gateway. Please verify any other sensor’s compatibility before making a purchase.

4The button can only be used at home with your EZVIZ Home Gateway to ensure steady connectivity. Once it’s disconnected from the Gateway, it will no longer work as an operating controller. 

5The current version only allows the C6 Smart Camera to auto-track activities upon sensor detection. Other pan/tilt cameras will only record at their original fixed viewing angle when the sensor detects activity. The sensor-triggered auto-tracking feature is under development and will likely be available on most EZVIZ indoor PT cameras in 2022.

 

Specifications Home Getaway

 

Operation Conditions -10 °C to 55 °C ( 14 °F to 131 °F ), humidity 95% or less (non-condensing)

Dimensions Φ 70.0 × 25.4 mm (Φ 2.75 × 1.00 inch)

Net Weight 71 g (2.5 oz)

Package Size 95.5 × 80.5 × 98.5 mm (3.8 × 3.2 x 3.9 inch)

Power Supply Uses Micro USB, DC 5V / 1A

Power Consumption Max.3W

Communication Methods RJ45 interface network cable Wi-Fi 2.4 GHz ZigBee 3.0

Communication Distance Wi-Fi (2.4 GHz) < 200 m ZigBee 3.0 < 200 m (Tested in open environment)

Antenna Built-in

 

Specifications PIR Sensor

 

Operation Conditions -10 °C to 55 °C (14 °F to 131 °F), humidity 95% or less (non-condensing)

Dimensions Main body Φ 43.5 × 32.0 mm (1.7 × 1.3 inch) Base: Φ 29.0 × 9.5 mm (1.1 × 0.4 inch)

Package Size 92 × 52 × 93 mm (3.6 × 2.0 × 3.7 inch)

Weight 92 g (3.2 oz) with package

Detection Type Passive infrared (PIR)

Detection Distance Up to 7 m / 23 ft

Detection Angle 90° horizontal, 90° vertical

Recommended Installation Height 1.8 to 2.5 m for wall-mounted installation

Pet-Proof Detection Requires using the pet shield and an installation height of 50 cm or higher above the pet

Low Battery Reminder Supports

Anti-Tamper Alarm Supports

Installation Methods Adhesive back with magnetic parts. Supports wall and ceiling flip-over installation

Battery Type Cell battery CR2450

Battery Life High-performance mode: Up to 1 year Energy-saving mode: Up to 2 years

Protocol ZigBee 3.0

Communication Distance < 200 m (Tested in open environment)

 

Specifications Open/Close Sensor

 

Operation Conditions -10 °C to 55 °C (14 °F to 131 °F), humidity 95% or less (non-condensing)

Dimensions Main body 53.5 × 22.5 × 13.5 mm (2.1 × 0.9 × 0.5 inch) Magnet: 32.0 × 10.5 × 13.5 mm (1.2 × 0.4 × 0.5 inch)

Package Size 92 × 52 × 93 mm (3.6 × 2.0 × 3.7 inch)

Weight 80 g (2.8 oz) with package

Recommended Trigger Distance Wooden door > 25 mm Iron door > 15 mm

Low Battery Reminder Supports

Anti-Tamper Alarm Supports

Installation Method Adhesive back for peel-and-stick installation

Battery Type Cell battery CR1632 × 2

Battery Life Up to 2 years (Based on the usage of 30 detections per day)

Protocol ZigBee 3.0

Communication Distance < 200 m (Tested in open environment)

 

Specifications Smart Button

 

Operation Conditions -10 °C to 55 °C ( 14 °F to 131 °F ), humidity 95% or less (non-condensing)

Dimensions Φ 40.6 × 12.3mm (Φ 1.6 × 0.5 inch)

Package Size 92 × 52 × 93 mm (3.6 × 2.0 × 3.7 inch)

Weight 68 g (2.4 oz) with package

Control Methods

Single Click < 2 s

Double Click Interval time < 0.5 s

Long Press ≥ 2 s

Modes Arm / Disarm Mode, Emergency Button Mode

Low Battery Reminder Supports

Anti-Tamper Alarm Supports

Installation Method Place anywhere; adhesive back for peel-and-stick installation

Battery Type Cell battery CR2032

Battery Life Up to 2 years (Based on the usage of 15 clicks per day)

Protocol ZigBee 3.0

Communication Distance < 200 m (Tested in an open environment)