100' Poly Drip Tubing Hose - 1/2 inch OD for Garden Irrigation New
- Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
- Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground
- Resistant to cracking, heat, UV rays and chemicals
- Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
- Use with DIG's 0.700 compression fittings, color black, and Nut Lock fittings
- Dimensions: 100 ft. with .600 ID x .700 OD
- Bending radius: 1 ft.
- Maximum operating pressure: 60 psi
- Can be installed above or below ground
- DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
Dimensions
Assembled Depth (in.)
17.5 in
Assembled Height (in.)
5 in
Assembled Width (in.)
17.5 in
Inner Diameter (in.)
.50
Outer Diameter (in.)
.50
Tubing Length (ft.)
100
Tubing Size
1/2"
Details
Color Family
Blacks
Drip Irrigation Tubing Type
Distribution Tubing
Irrigation System Component
Tubing
Pack Size
1
Pressure Rating
60 psi