Product Description
Note1:
Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
Note2:
【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by Right scan tool or "re-learning" Right Activation tool is important , if you wanna Your vehicel Relearn Procedure Description , Pls email us ...
1.Stationary Relearn: Requires the vehicle be placed in the “Learn Mode”.
2.Automatic Relearn: For some vehicles, can be completed by driving.
3.OBD Relearn: Directly writes TPMS sensor IDs to the TPMS module via the OBD connector.
Installation of TPMS is recommended to be performed only by trained professionals.
Part Number:
40700-1AA0BFor Infiniti
2008-2010 Infiniti M35
2008-2010 Infiniti M45
2008-2010 Infiniti QX56
2008 Infiniti FX35
2008 Infiniti FX45
For Nissan
2007-2008 Nissan 350z
2008-2012 Nissan Armada
2007-2012 Nissan Altima
2009-2012 Nissan Cube
2007-2012 Nissan Frontier
2009-2016 Nissan GT-R
2011-2012 Nissan Juke
2007-2011 Nissan Maxima
2007-2009 Nissan Quest
2008-2012 Nissan Rogue
2007-2012 Nissan Sentra
2007-2012 Nissan Xterra
2008-2012 Nissan Titan
2007-2012 Nissan Versa
2006-2012 Nissan Murano
2008-2011 Nissan Pathfinder
Please make sure your existing part number matches one of the numbers listed above.If the number(s) do not match,then the part will not work with your vehicle.
■ Installation Process for reference only :
1. Loose the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
4. Usually the standard service delivery takes 15-20 working days (except weekends and holidays),If you don't receive the item in time, please contact us freely, we'll try our best to solve the delivery problem.