Description:
Jack, positive outside and negative inside
2V: Ai Hua old Walkman 2v power dedicated. The design voltage output is 2.05v, up or down 1%. Note that this is really 2 volts, not 2.5v, and there is no pressure on your favorite machine. The reason for the design of 2.05v is to take into account the load wire loss. The jack size is 3.5*1.35, positive on the outside and negative on the inside. It is suitable for all 2-volt machines of Aihua. The batteries of such machines are 2v lead-acid batteries, such as J202, J303, J505, J707, jx609, jx619, jx709, jx629, jx639, jx719, jx729, jx505, etc. jx50, jx707, jx70 day edition, jx819, jx839, jx849, jx959, P10, rx626, RL75, px370, px470, PX830, px530, px610, px720, pl30, pl35, F50, pl77, jx810, jx810D, jx828, jx909, jx929, jx2000 and other models. It is very convenient to plug into the mobile phone charger (the plug of the mobile phone charger is greater than 300ma).
3 Volt (normal jack) : Suitable for 3 V Walkman. The jack size is 3.5*1.35, positive outside and negative inside. The output voltage is 3.05V, plus or minus 1%. Applicable models: such as Aihua, Toshiba, Sanyo and other models installed with two batteries, jack marked 3V, positive outside and negative inside can be used.
Be aware that there are 3 volt (thin jack) Walkmen. The jack size is 2.5*0.7, negative outside and positive inside. unusable
Payment:
Shipping:
| Locations | Way of Transportation | Shipping Time |
| US | USPS | 10-20 Working Days |
| CA,AU,UK & Other Areas | Air Mail Post | 20-35 Working Days |
Contact Us: