• Fit Vehicles:
  •  
  • 1998 Toyota Avalon 3.0L 1999-2000 Toyota Sienna 3.0L
  •  
  • Features:
  •  
    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation
    • Precision manufactured with a sensing element incorporating premier technical ceramics
     
  •  
  • Where are my oxygen sensors located?
  •  
  •  
  • Diagnostic Trouble Codes (DTC)
  • 2pcs for 99-2000 Toyota Sienna 3.0L V6 Upstream Air Fuel Ratio Oxygen Sensor

    Fit Vehicles:

     

    1998 Toyota Avalon 3.0L
    1999-2000 Toyota Sienna 3.0L

     

    Features:

     

    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation

    • Precision manufactured with a sensing element incorporating premier technical ceramics

     

     

    Where are my oxygen sensors located?

     

     

    Diagnostic Trouble Codes (DTC)


    When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.

     

    How to replace an oxygen sensor?

     

    1- Disconnect the battery.

    2- Locate the sensor connector by following its wires. Disconnect it.?

    3- Remove the sensor cable from its clips all along its way to the sensor.

    4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.

    5- Remove the sensor and fit the new one.

    6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.

    7- Reconnect the battery and wait 5 minutes before starting the engine. 

     

                   

                   

            

     

     

    Please take a video clip of the voltmeter and contact us if our sensor:

     

    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.



    content_src_url


    Item Specifics
    Type :Air / Fuel Ratio, Oxygen Sensor
    Manufacturer Part Number :TA82701700P
    Brand :Topcn-autoparts
    Number of Pieces :2
    Fitment Type :Direct Replacement
    Interchange Part Number :8946748011, 234-9023,, O2 Oxygen Sensor
    Superseded Part Number :234-9009, 234-4622,
    Other Part Number :234-4061, 9610418,
    Manufacturer Warranty :1 Year
    Custom Bundle :Yes
    Modified Item :No
    Position :Upstream
    Universal Or Specific Fit :Specific
    Attachment Method :Screw-On
    Thread Size :M18
    Terminal Type :Blade
    Thread Diameter :0.708 In.
    Heated :Yes
    Hex size :7/8 in
    Number of Wires :4, 4
    Wires :4, 4
    Housing Material :Metal
    Automotive Color / Finish :Steel
    Placement on Vehicle :Before Catalytic Converter
    Location :Front
    Length :0 In.
    Bundle Description :Include Oxygen Sensor and Air / Fuel Ratio Sensor
    Type :Sensor
    Features :Direct Fit

    Shipping

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    Payment

    We accept multiple payment methods

    Returns

    1.We stand behind every product we sell.
    2.All of our brand new items come with a 30-Days money-back guarantee.

    Customer Services

     Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

    Feedback

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Shop Category
    2pcs for 99-2000 Toyota Sienna 3.0L V6 Upstream Air Fuel Ratio Oxygen Sensor

    Fit Vehicles:

     

    1998 Toyota Avalon 3.0L
    1999-2000 Toyota Sienna 3.0L

     

    Features:

     

    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation

    • Precision manufactured with a sensing element incorporating premier technical ceramics

     

     

    Where are my oxygen sensors located?

     

     

    Diagnostic Trouble Codes (DTC)


    When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.

     

    How to replace an oxygen sensor?

     

    1- Disconnect the battery.

    2- Locate the sensor connector by following its wires. Disconnect it.?

    3- Remove the sensor cable from its clips all along its way to the sensor.

    4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.

    5- Remove the sensor and fit the new one.

    6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.

    7- Reconnect the battery and wait 5 minutes before starting the engine. 

     

                   

                   

            

     

     

    Please take a video clip of the voltmeter and contact us if our sensor:

     

    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.



    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    We accept multiple payment methods

    1.We stand behind every product we sell.
    2.All of our brand new items come with a 30-Days money-back guarantee.

     Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.


    Copyright of Topcn-autoparts. All rights reserved.