Need Help?
Contact Us
-
Australian
Family Business -
Local Stock
-
Fast Delivery
DESCRIPTION
Product Description
| Product | : | Rear View Camera |
| Type | : | OE Connector |
| Placement on Vehicle | : | Tailgate |
| Material | : | Plastic, Glass |
| Camera Plug Type | : | 4 pins |
| Part Specs | : | High Quality Aftermarket |
| Condition | : | Brand New |
| MPN/Item No. | : | 100898 |
| Manufacturer Warranty | : | 1 Year (Part only) |
| QTY Supply | : | 1 Piece |
Fitment
- Isuzu D-Max RT 2016 - 2020
Camera Specifications
- CMOS sensor: PIXELPLUS PCB030K
- Image sensor resolution: 640 x 480
- High quality Lens
F number: 2.0 IRIS: Fixed Lens Construction: Plastic lens / 5 Elements Angular Field of View: Diagonal 186.5°/Horizontal 149.3°/Vertical 111.8° Coating: Hard Coating, IR-Cut Coating
- Video Format: NTSC
- Video Output: Full color output, 1.0Vp-p at load 75Ω
- Minimum illumination: 0.1lux
- Working voltage: 9 ∼ 18V
- Working Temp.: -20 ∼ +70℃
- Storage Temp.: -40 ∼ +85℃
- Waterproof class : IP69K
note for window regulator motor with anti-pinch function
Instruction for setting anti-pinch function for electric motors
– Do not test the motor before setting in the door, or the anti-pinch function
will fail and must reset in the following way.
– The motors had been tested and set up correctly before they were delivered.
– Install the motor and connect with the one-touch window switch. Pull up the switch and it is correct if the window goes up all the way.
– If the window drops down after reaching its top end then the reset is necessary for the anti-pinch function.
– The motors had been tested and set up correctly before they were delivered.
– Install the motor and connect with the one-touch window switch. Pull up the switch and it is correct if the window goes up all the way.
– If the window drops down after reaching its top end then the reset is necessary for the anti-pinch function.
Instruction for the reset
- Close the window completely.
- Keep holding the window switch in the UP position for about 2-5 seconds after it fully closes.
- Lower the window completely.
- Keep holding DOWN for about 2-5 seconds.
- Raise it completely again and hold UP for another 2-5 seconds.
- Test the AUTO one-touch function.
Resetting completed if window didn't go down after reaching the top.
If it goes down after reaching to the top, please repeat the above steps until it succeed.
Products
UAP Auto Parts supplies aftermarket and genuine replacement parts for vehicle repair and replacement purposes. We are an independent parts retailer and are not affiliated with or endorsed by any vehicle manufacturer unless stated otherwise.
Manufacturer names, trademarks and OEM numbers are used for identification and compatibility purposes only.
Product Information & Fitment
We make every effort to ensure product descriptions, images and compatibility information are accurate; however, errors or variations may occur.
Please compare the product images, specifications and part numbers with your original part before purchasing. Vehicle fitment may vary by production date, engine, body style, variant or factory options. If unsure, contact us with your VIN or vehicle details.
Product colour, finish, appearance or packaging may vary slightly due to photography, screen settings or manufacturing variations.
Pricing, Stock & Shipping
Prices and stock are subject to change and availability.
Free shipping applies only to eligible products and locations. Bulky, oversized, dangerous goods, residential, limited-access or remote deliveries may incur additional freight charges. We will contact you before dispatch if additional payment is required.
If a listing, pricing, stock or freight error affects your order, we will contact you with an appropriate resolution, including a refund where applicable.
Installation & Warranty
Parts should be installed by a qualified automotive technician where appropriate. Incorrect installation, misuse, modification or improper application may affect warranty coverage.
Warranty generally covers manufacturing defects under normal use and, to the extent permitted by law, does not ordinarily cover labour, towing, vehicle hire or other consequential costs.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). Nothing in these Terms & Conditions excludes or limits any rights or remedies available to you under the ACL.
By placing an order with UAP Auto Parts, you acknowledge and accept these Terms & Conditions.
UAP Auto Parts is committed to supplying quality products backed by reliable warranty support. Please review the following warranty terms before making a claim.
Warranty Period
Unless otherwise stated, products sold by UAP Auto Parts are covered by a 12-month manufacturer's warranty against manufacturing defects, starting from the invoice date or delivery date for online orders.
Window regulator switches are covered by a 3-month manufacturer's warranty. Halogen bulbs are covered for manufacturing defects only and exclude normal wear and tear, incorrect installation, physical damage or misuse.
Warranty Conditions
Warranty claims must include proof of purchase. Products must be correctly installed, used for their intended purpose and installed in accordance with the manufacturer's instructions. Proof of installation by a qualified automotive mechanic is required.
For electrical products, we may require a written report from a qualified automotive electrician or licensed automotive repairer confirming correct installation, diagnosis of the fault, and that the fault relates to the product rather than the vehicle or its electrical system.
What Is Not Covered
Warranty does not cover faults or damage caused by incorrect installation or diagnosis, misuse, modification, tampering, accidental or water damage, electrical surges, racing or competition use, normal wear and tear, corrosion, improper storage or handling, or failure to follow installation instructions.
Electrical products with broken or removed security seals or tamper-evident labels may not be eligible for warranty assessment, subject to your rights under Australian Consumer Law.
Warranty Coverage
If a manufacturing defect is confirmed, the product may be repaired, replaced or refunded as appropriate and in accordance with Australian Consumer Law.
To the extent permitted by law, warranty coverage does not ordinarily include labour or installation costs, towing, vehicle hire, downtime, loss of income, or indirect or consequential loss.
Making a Warranty Claim
- Contact UAP Auto Parts before returning the product.
- Provide your order number, proof of purchase and details of the fault.
- Return the product with the completed Warranty Claim Form.
- Provide installation or inspection reports where requested.
Some products may require assessment by the manufacturer or an authorised repair agent.
Assessment Time
Warranty assessments generally take 1 to 4 weeks, depending on the product and manufacturer. Approved claims are generally processed within 3 to 5 business days after assessment is completed.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. You may also be entitled to repair or replacement where goods fail to be of acceptable quality and the failure is not major.
Nothing in this warranty policy excludes, restricts or modifies any rights or remedies available under Australian Consumer Law.
Need Assistance?
For warranty assistance or to submit a claim, please contact our customer service team with your order number and product details.
At UAP Auto Parts, we want you to be satisfied with your purchase. If you need to return an item, please review the following policy.
Change of Mind Returns
Most standard products may be returned within 30 days of delivery. Items must be unused, uninstalled, in their original packaging and in resalable condition, with proof of purchase. Products that do not meet these conditions may not be accepted.
Special-order or non-stock items cannot be returned for change of mind. Modified, damaged, tampered with or incorrectly installed products may also be excluded from change-of-mind returns.
How to Return an Item
Please contact our Customer Service team before returning an item and provide your order number, reason for return and photos where applicable. Once approved, we will provide return instructions.
Returns should be securely packaged and sent with proof of purchase to:
UAP Auto Parts
Unit 3, 8 James Street
Bayswater WA 6053
Australia
Unit 3, 8 James Street
Bayswater WA 6053
Australia
Return Shipping Costs
Customers are responsible for return shipping costs for change of mind, incorrect product selection or items no longer required.
Where we supplied an incorrect product, or where required under Australian Consumer Law, we will cover reasonable return freight costs. Original shipping charges are generally non-refundable unless required by law. Additional freight charges may apply to unclaimed parcels or orders returned due to an incorrect delivery address.
Refunds
Once a returned item has been received and approved, refunds are generally processed within 3–5 business days to the original payment method. Please allow additional processing time by your bank or payment provider.
Damaged, Incomplete or Incorrect Orders
Please contact us as soon as possible if your order arrives damaged, incomplete or incorrect. Where possible, provide photos of the product, packaging and shipping label to assist with assessment and any freight claim.
The parcel may need to be presented to the relevant freight carrier for inspection where required.
Electrical Products
Electrical products with opened security seals, sealed packaging or damaged or removed tamper-evident labels are generally not eligible for change-of-mind returns.
Faulty electrical products may require a written inspection report from a qualified automotive electrician or licensed automotive repairer confirming correct installation and identifying the product fault.
Returned electrical products may be inspected or referred to the supplier or manufacturer for testing. Damage caused by incorrect installation, incorrect diagnosis, misuse, modification or electrical faults within the vehicle is not covered by our voluntary warranty.
Product Assessment
Some returned products, particularly electrical products and warranty claims, may require inspection by our technical team, supplier or manufacturer before a repair, replacement or refund can be approved. Assessment times may vary.
In-Person Returns
Returns may also be made at our Bayswater warehouse Monday to Friday, 8:00 am–5:00 pm.
Australian Consumer Law
Nothing in this policy excludes or limits your rights under the Australian Consumer Law. If goods are faulty, not of acceptable quality, not fit for purpose or do not match their description, you may be entitled to a repair, replacement, refund or other remedy as provided by law.
Need Assistance?
If you have any questions about a return or refund, please contact our Customer Service team through eBay message.
If you need help finding the right part or have any questions, please contact us here via eBay Messages. We will reply as soon as we can during business hours.
At UAP Auto Parts, we aim to process and deliver orders as quickly as possible. Please review the following delivery terms before placing your order.
Order Cancellation
Cancellation requests should be submitted through our website or Customer Service team as soon as possible. Orders cannot be cancelled once dispatched. If you no longer require a dispatched item, please refer to our Returns Policy.
Delivery Address
Please ensure your delivery address is correct and complete before placing your order. We are not responsible for delays, returns or failed deliveries resulting from incorrect or incomplete address information provided by the customer.
If a parcel is returned due to an incorrect address, failure to collect, or an address change after dispatch, return and re-delivery freight charges may apply. Courier redirection fees are the customer's responsibility where applicable.
Warehouse Collection
We will notify you by email when your order is ready for collection. Please wait for this notification before visiting the warehouse.
Orders should be collected within 30 days. If an order remains uncollected, we may contact you and, after 30 days, cancel and refund the order less any applicable fees permitted by law.
Please provide your eBay pickup code when collecting an eBay order.
Authority to Leave (ATL)
If Authority to Leave is selected, you authorise the courier to leave the parcel in a safe place at the delivery address when nobody is available to receive it.
Where ATL is not selected, the courier may arrange re-delivery or redirect the parcel to a depot, post office or other collection location. Additional charges may apply.
Shipping Charges
Shipping charges are calculated based on factors including the delivery location, parcel size and weight. Selected products may qualify for free or promotional shipping.
Oversized, bulky, residential, limited-access or remote-area deliveries may incur additional freight charges. If additional payment is required, we will contact you before dispatch to discuss the available options.
Delivery, Tracking & Missed Deliveries
Delivery timeframes are estimates and may vary depending on location, courier networks, public holidays and other circumstances beyond our reasonable control.
Tracking information will be provided after dispatch where available. Please monitor your tracking and ensure the parcel can be received or collected where required.
For missed deliveries, the courier may arrange collection, re-delivery or transfer the parcel to a local depot or post office. Storage, return or re-delivery fees may apply if the parcel is not collected within the courier's required timeframe.
Checking Your Delivery
Please inspect your order as soon as possible after delivery. If it arrives damaged, incorrect or incomplete, contact us promptly and provide photos of the product, packaging and shipping label where applicable.
Delivery Delays
Delivery delays may occur due to circumstances beyond our reasonable control, including courier disruptions, severe weather, floods, bushfires, industrial action, customs inspections, road closures, public holidays or incorrect delivery information.
© 2026 UAP Auto Parts. All rights reserved.
