5V 1/8NPT Stainless Steel Fuel Pressure Transducer Sender For Oil Air Water 5 15 30 60 100 150 200 Psi

Specification:

Condition: Brand New!!

Product Name: Oil Fuel Pressure Transducer 

Voltage: DC 5V

Material: Stainless Steel & Rubber

Color: Silver & Black

Sender Length: 50mm / 1.96"

Cable Length: 1M/39.37"

Thread: 1/8"NPT

Pressure: 5Psi ,15Psi, 30Psi, 60Psi, 100Psi, 150Psi, 200Psi

Measurement accuracy: ±1.0%FS(0～80℃) ±1.5%FS(-20～100℃)

Working Current:﹤=10 mA

Response Time:﹤=2.0 ms

The Biggest Pressure:Double the working pressure

Destroy Pressure:Triple the working 

Working TEMP.Range:0-85 Celsius Degree

Storage Temperature Range: 0-300 Celsius Degree

Measuring Error: +_1.5％FSO

Temperature Range Error: +_ 3.5％FSO

Cycle Life: 500.000times

Quantity: 1pc

Features:

-It's advance pressure sender than traditional mechanical pressure sender;

-CMC for Load Cell Sensor;

-CMC for Pressure and Pull Pressure Sensor.

Application: 

- Cars ,Trucks

- Industrial process control of engineering vehicle

- Aeronautics ,and Astronautics

- Medical equipment compressor

Installation method

(1) Select the place easy to operate and maintain for installation;

(2) It should be installed as far away from the vibration source as possible

(3) Keep away from heat sources as far as possible;

(4) It is better to connect with the measuring pipe through a valve

(5) When installing, clamp it on the six sides of the transmitter with a wrench

Package Includes:

1x Pressure Transducer (With Cable)

Note:

1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.

2.There are no instructions included in this kit.If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.

3.When handling and installing the sensor (transmitter), care should be taken to avoid the damage of components due to impact, which will affect the circuit performance

4.Sensor (transmitter) inlet pressure sensitive die, do not touch with foreign matter

5.Please strictly follow the wiring method for electrical connection. Wrong wiring will cause damage to the amplifier circuit.