Features

1.Knob comes with start and stop function

2.Slow start and slow stop time can be set

3.Limit the upper and lower limit of the speed

4.Frequency 1-100KHZ can be set

5.Use digital encoder knob, stable and durable, high precision and better consistency

6.Parameters can be set for power-down storage

Product parameter

Input voltage: DC6-60V (the specific voltage is equal to the rated voltage of the motor)

Output voltage: linear under load

Output current: 0-30A

continuous current: within 20A

Speed regulation type: current regulation

speed regulation method: encoder knob 360 degrees

Speed adjustment range: 0-100% can be set

frequency: 1-100KHZ can be set

Slow start and slow stop: Can be set

Digital speed display: 0-100 percentage meter

Wiring type: Barrier terminal block

Support motor: brushed motor

Module size: length * width * height 96mm*61mm*34mm

product net weight: 105g

Panel opening: length * width 92mm*56mm

installation method: embedded

Package Includes:

1 x Speed Controller

Digital encoder knob operation

Short press-switch motor start and stop

Long press-enter the setting interface

Clockwise-increase

Counterclockwise-Decrease

Enter the setting interface short press: switch function 1 function 2 function 3 function 4 function 5 function 6 long press to save and exit

Enter the setting interface to rotate: turn left to decrease the value, turn right to increase the value

low start time setting Function 1: 000-100 The slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second.

Slow stop time setting Function 2: 000-100 The slow stop time is adjustable between 0-10 seconds. The default is 1 second.

Speed lower limit setting function 3: 000-080 The minimum speed is adjustable between 0-80% and less than the maximum speed setting value. The default is 0.

Speed limit setting function 4: 000-100 The maximum speed is adjustable between 0-100% and is greater than the minimum speed setting value. The default is 100%.

Acceleration and deceleration value setting Function 5: 001 002 005 010 015 020 025 The speed changes correspondingly for each revolution 1%, 2%, 5%, 10%, 15%, 20%, 25%.

Frequency setting function 6: adjustable between 1-100KHZ, default 15KHZ

Notice:

The input voltage must be divided into positive and negative, not 220V

The input voltage should be equal to the rated voltage of the motor within 6-60V

Such as the motor 12V input 12V, the motor 36V input 36V