Solar Set 1500 Watt Converter 30A Charge Controller Cable Photovoltaic Island System

For garden, camping, motorhomes, boats

This system is ideal for supplying gardens, campsites, camping, boats, mobile homes, weekend houses or even your home. Basic set for setting up an independent solar power system. We have put together this system in such a way that there is only a minimum of installation effort required.

To store the electricity generated, you need a 12V battery storage (rechargeable battery). This set is suitable for charging lead acid, gel and AGM rechargeable batteries (batteries).

All components are pre-assembled and only need to be plugged together according to the enclosed connection diagram! And off you go with your own electricity…

Scope of delivery: 

• 1 piece voltage converter 1500W/3000W 12V modified voltage
• 1 piece 30A LCD solar charge controller 
• 1 pair of 2m 6mm² connection cables charge controller -> battery with battery terminals 
• 1 pair of 5m 6mm² connection cables module -> charge controller with pressed-on solar plugs

Technical description of the components:

Voltage converter

With this device you can generate 230 V alternating voltage from 12 V direct voltage (e.g. from car batteries, truck batteries or batteries from solar island systems) and thus operate many household appliances with a nominal voltage of 230 V.

Scope of delivery: converter, battery connection cable DC approx. 60cm, operating instructions included. Wiring diagram

Advantages: 

• modified voltage
• Soft start function
• 2x protective contact socket
• Average self-consumption without load when switched off 0 watts
• Reverse polarity protection for battery (fuse blows)
• Automatic shutdown in case of overload or short circuit
• Approved for use in vehicles
• Sturdy housing made of aluminum and molded sheet metal
• Certificates: Transducer, CE, RoHS; E8 Manufacturing according to din ISO 9001:2000 

Details:

• Weight: 3kg
• Dimensions: 322 x 208 x 78 mm
• Output voltage: 230 V (50Hz)
• Input voltage operating range: 12 V
• Undervoltage shutdown: < 10.4V
• Overvoltage shutdown: > 15.0 V
• relative humidity: < 60%
• USB device power supply: 1x 5V 2.1A
• Overtemperature protection shutdown: > 60°
• Low voltage alarm: < 10.6V
• Installation of cable remote control: no installation possible
• Continuous power: 1500 W
• Peak power: 3000 W min. 20 ms for start-up or Cold currents
• Efficiency: > 85% (typically approx. 92%)
• Socket: 2 Schuko sockets

Charge controller

The charge controller is connected between the solar modules and the battery and is therefore responsible for controlling the charging process, so the battery can always be charged to the maximum. A built-in microprocessor charges the battery gently, guaranteeing your battery a long service life.

All voltages, charging processes and parameters can be shown on the display. You can set the final charging voltage using the control panel, so the solar charge controller can be used on any battery. You can set the voltage from which the undervoltage protection should be activated and from which operating voltage the undervoltage protection should reset again.

Overcharging the battery can be prevented because the charge controller stops the charging process when the set end-of-charge voltage is reached and switches to trickle charging.

Advantages:

• Over- and deep-discharge protection for the battery prevents feed back to the solar panel
• Automatic shutdown should the charging current exceed the capacity of the controller
• Automatic shutdown in the event of a short circuit
• Prevents feedback to the panel
• Automatic shutdown in the event of overload and short circuit
• Consumers are switched off when the accumulators are undervolted
• Overload and short-circuit protection, consumer shutdown in the event of accumulator undervoltage
• Automatic temperature compensation
• Automatic voltage level identification system
• Intelligent PWM charging mode
• Adjustable final charging voltage
• Night and time control
• Display of charging and discharging power in Ah
• Protection against battery discharge via solar connection
• Undervoltage shutdown of the small consumer output
• Protection in the event of battery polarity reversal
• Protection against overload and short circuits
• for lead acid, gel and AGM batteries (batteries)
• Representation with LCD graphic display
• Display of the battery charge status is displayed

Details:

• Weight: 0.3kg
• Battery voltage: 12V or 24V automatic detection
• Charging current: 30 A
• Own consumption: < 20 mA
• Dimensions: 178mm x 102mm x 46mm
• Color: Black

A total of three solar modules can be connected to the 30 A charge controller.

The cable sets supplied are configured and checked by our employees. They contain the necessary connections (solar plugs, battery terminals or wire end sleeves). Tested solar cables made in Germany are used.