Application:
This sterilizer is class N steam sterilizer application to solid material. They provide an economic sterilization solution for dental clinics, laboratories, cosmetic hospitals, tattoo shops, veterinarians, surgical room, emergency room, ophthalmology, gynecologetc.
Specification
Chamber size(stainless steel SU304):
18 liter(Φ250mmX355mm)
Machine size:
18 liter(W:385mm H:365mm D:475mm)
Power: AC 110/1200W/11A;AC 220/1400W/6.3A
Sterilization temperature/sterilization pressure: 121℃-1.2bar(0.012Mpa) 134℃-2.2bar(0.022Mpa)
Sterilization time: 25Min(121℃) 6Min(134℃)
Lock system:
Double control with electric and mechanical lock
Guard against dry-combustion
Safety:
Over-heat protection Safety valve
Machine weight: 18 liter(G.W:29.9kg,N.W:28.4kg)
Sterilization Process:
“134℃ Program” button:
Heating to pressure 0.70bar(HE.1)→the first exhaust(TE.1)→Heating to pressure 1.70bar
(HE.2)→the second exhaust(TE.2)→Heating to pressure 2.20bar (HE.3)→ Start 135℃
Sterilization(Lasts 6 minutes)→the third exhaust(TE.3)→Balance to pressure0.00bar (LED display
“END”) → open the door (Sterilization completed).
“121℃ Program” button:
Heating to pressure 0.70 bar(HE.1)→the first exhaust(TE.1)→Heating to pressure 1.00bar (HE.2)
→the second exhaust(TE.2)→Heating to pressure 1.20bar (HE.3)→ Start 122℃ Sterilization(Lasts
25 minutes)→the third exhaust(TE.3)→Balance to pressure0.00bar(LED display “END”)→open
the door (Sterilization completed).
“Dry” Program button:
Caution: Dry program working needs the door is open.
Press “Dry” program button, the indicator starts to flash. Then press “START/STOP” button to start
19-minute dry program during indicator flashing.
“Exhaust” button :
When sterilizer was not running, but found high pressure inside. That’s need to use “Exhaust” button.
Operation: 1.Click “Exhaust” button. 2.Indicator will turn from “OFF” to “ON”. 3. Indicator turned
back to “ON”. 4. Door can be opened. 5.5 “Abnormally Exit”
“Abnormally Exit”:
Operation can be used during program running, but you want to stop.
Operation: 1. Hold on pressing “START/STOP” button 3 seconds, 2.Temperature window showing
flashing “E00”. And sterilizer started exhaust. 3.Click “START/STOP” again after pressure window
showing 0.0 bar with the sound KA from lock opened. 4.Door can be opened until temperature window showing
Package Listing:
Main Machine*1pc
Tray rack*1pc
tray*3pcs
Tray holder*1pc
Fuse*2pcs
Drain tube*1pc
Measuring cup*1pc
Warning:
1 Do not open the door of the sterilizer during operation and working!
2 Every time using needs minimal distilled water 1000ml.
3 In case of emergency, please disconnect the power immediately.
4 If there has leakage from the door, Please adjust the tightness to a proper level.