AC Compressors:

Compressors are the heart of the A/C system, with a heavy responsibility to pump A/C refrigerant throughout the automobile’s A/C system. We take the upmost care when developing new compressors. We always make sure that our new compressors meet exact specifications, When you purchase a new compressor from Topcn, you are receiving a high quality product at price that is very afFor Fordable.

Feature:

• 【PREMIUM ALUMINUM MATERIAL】- This ac air compressor is a replacement compressor and clutch. Its main body is made of high-strength aluminum material, which is durable, rigid, and wearable. It will not crack, break, or leak. Such high-quality ensures a long-time use for each compressor kit.
• 【STRONG COOLING FUNCTION】- The auto ac compressor can provide sufficient pressure, which increases power force and decreases engine load. It dramatically improves the cooling function: features as high and stable efficiency, safety, and reliability.
• 【LOW NOISE & LOW FUEL CONSUMPTION】- AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.
• 【FULLY TESTED & EASY INSTALLATION】- The ac compressor clutch has been examined and tested carefully before its delivery. And the kit without refrigeration oil inside, be aware of it when starting your installation and replacement. If you need to add oil after a long time use, please add pure refrigerant, and should not be added to too much, 70-80% is appropriate.

Fit For:

2006-2011 For HONDA Civic 1.8L

Part Number

97555, 471-7054, 10361920, 11197555, CO 4918ZI,CO 4918T, CO 4918, 5512349, CO 4918AC, 98555

Note:

Please make sure the installation site is clean. Or it will cause operating obstruction, making the compressor's temperature very high, and the belt on the clutch may melt.
But you need to add the refrigerant. Please add it to 70-80%. Try not to fill it up. There may be noise if the refrigerant is added too much.
 

Installation Steps:

1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator and the expansion valve or orifice tube from the vehicle.
2. Next, flush the condenser and evaporator using a non-oil-based A/C flush. The valve must be removed from the expansion valve system before the evaporator can be flushed.
3. Flush evaporators from inlet to outlet.
4. Install the new receiver drier or accumulator and a new expansion valve or orifice tube.
5. Next, install the new or remanufactured A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread it more evenly throughout the system.
13. Start the vehicle’s engine and turn on the A/C system.

Package Included:

As the picture show