QS18VN6RQ5 Banner Engineering WORLD-BEAM QS18 Series: Receiver, Range: 20m; Input: 10-30V dc, Output: Complementary Solid State NPN, 6" Pigtail Euro-Style Quick-Disconnect Connector

Overview

• Universal housing design with 18 mm threaded lens; an ideal replacement for hundreds of other sensor styles
• Features a universal housing with an 18 mm threaded lens or side mounts
• Replaces hundreds of other sensors
• Meets IP67 and NEMA 6 standards for harsh environments
• Available in opposed, polarized and non-polarized retroreflective, convergent, regular and wide-angle diffuse, laser, ultrasonic, plastic or glass fiber optic, fixed-field and adjustable-field sensing modes

• Offers easy push-button TEACH-mode setup in Expert QS18E and ultrasonic models
• Ranges up to 20 m
• Features bright LED operating status indicators visible from 360
• Miniature self-contained photoelectric sensors in universal housing

• Easily fits (or retrofits) almost any mounting situation

• Exceptional optical performance, comparable to larger “MINI-style” or barrel sensors

• 10 to 30 V dc operation, with complementary (SPDT) NPN or PNP outputs, depending on model

• Bright LED operating status indicators are visible from 360°

• Rugged sealed housing, protected circuitry

• Models available with or without 18 mm threaded “nose”

• Less than 1 millisecond output response for excellent sensing repeatability

• Choose 2 m (6.5 ft) or 9 m (30 ft) cable or 150 mm (6 inch) Pico-style pigtail QD

To order the 9 m (30 ft) cable model, add suffix "W/30" to the cabled model number.

QD Models. For 4-pin integral Euro-style QD, add suffix “Q8” (e.g., QS186EQ8). For 4-pin

integral Pico-style QD, add suffix “Q7” (e.g., QS186EQ7). For 4-pin 150 mm (6") Euro[1]style pigtail, add suffix “Q5” (e.g., QS186EQ5). For 4-pin 150 mm (6") Pico-style pigtail, add suffix “Q” (e.g., QS186EQ).

 Supply Voltage

• 10 to 30 V dc (10% maximum ripple) at less than 25 mA, exclusive of load;
• Protected against reverse polarity and transient voltages

Repeatability

• Opposed Mode: 100 microseconds
• FF Mode: 160 microseconds
• All others: 150 microseconds

Adjustments

• Glass Fiber Optic, Plastic Fiber Optic, Convergent, Diffuse, and Retroreflective mode models (only): Single-turn sensitivity (Gain) adjustment potentiometer

Indicators

• 2 LED indicators on sensor top:
• Green solid: Power on
• Amber solid: Light sensed
• Green flashing: Output overloaded
• Amber flashing: Marginal excess gain (1 to 1.5x excess gain)
• Prior to date code 0223, the output indicator was red.

Construction

• ABS housing
• 3 mm mounting hardware included

Connections

• 2 m (6.5 ft) 4-wire PVC cable, 9 m (30 ft) 4-wire PVC cable, 4-pin Pico[1]style or Euro-style QD, 4-pin Pico-style or Euro-style 150 mm (6 in) pigtail QD, depending on model

Output Configuration

• Solid-state complementary (SPDT): NPN or PNP (current sinking or sourcing), depending on model;
• Rating: 100 mA maximum each output at 25 °C
• Off-state Leakage Current (FF Mode): less than 200 μA @ 30V dc
• Off-state Leakage Current (All others): less than 50 μA @ 30V dc
• ON-state Saturation Voltage: less than 1 V @ 10 mA; less than 1.5 V @ 100 mA
• Protected against false pulse on power-up and continuous overload or short circuit of outputs

Output Response

• Opposed Mode: 750 microseconds ON; 375 microseconds OFF
• FF Mode: 850 microseconds ON/OFF
• All others: 600 microseconds ON/OFF
• NOTE: 100 millisecond delay on power-up; outputs do not conduct during this time

Environmental

• IEC IP67 
• NEMA 6

Operating Conditions

• Temperature: –20 °C to 70 °C (–4 °F to 158 °F)
• Relative Humidity: 90% @ 50 °C (non-condensing)