AC Compressors:

Compressors are the heart of the A/C system, with a heavy responsibility to pump A/C refrigerant throughout the automobile’s A/C system. We take the upmost care when developing new compressors. We always make sure that our new compressors meet exact specifications, When you purchase a new compressor from Topcn, you are receiving a high quality product at price that is very afFor Fordable.

Feature:

【PREMIUM ALUMINUM QUALITY】- Excellent material adopts fine workmanship with a stable structure. It is wear-resistant, anti-corrosion, and anti-rust. Grooves: 6. Pulley Diameter: 4.7"/ 120 mm.

【STRONG COOLING FUNCTION】- Fabulous compression ability effectively improves the cooling effect. Good heat dissipation and ventilation will not cause load and damage to the water tank radiator.

【LOW NOISE & FUEL CONSUMPTION】- Low output power can reduce motor load and fuel consumption during work; Effective environmental protection conforms to energy saving. A small vibration amplitude provides more comfortable and low noise.

【EASY INSTALLATION】- Effective detection function tested carefully before its delivery. No need to weld or adjust during installation.

【VEHICLE FITMENT】- It is highly compatible with most air-conditioning compressors of corresponding car models. The overall performance of the car improved.

Fit For:

Scion xD 2008-2014 1.8L
For TOYOTA Matrix 2009-2010, 2012 1.8L
For TOYOTA Corolla 2009-2010 1.8L

Interchange Part Number:

11167328, 5512719, 2403-558579, CO 11210C, KT 2880
67328

OEM and Competitor Interchange:

Four Seasons:67328

Spectra: 0610290

Denso: 471-1608,471-1632

Ranshu:14-0748C

Attention Please:

Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.

Installation Method

1. Remove compressor:

Remove the A/C belt from the A/C compressor pulley. May involve loosening the belt tensioner (if equipped).

2.receiver drier or accumulator, orifice tube or expansion valve.

3.Disconnect the negative battery cable.

4.Remove the bolt that secures refrigerant lines to the A/C compressor. Inspect A/C lines for any contamination such as metal or excessive dirt inside of them. If you find any contamination the system will need to be cleaned.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the  evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.  

5.Drain all the oil from the new compressor ,if you compressor has a drain plug you will need to open it up and drain what oil is in there too.

6.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.

7.Install new receiver drier or accumulator and new orifice tube or expansion valve.

8.Evacuate the A/C system for a minimum of one hour.

9.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.

10.Turn on the A/C system with the engine running and check to see if cold air is now coming out of the air duct.

11.If the A/C system is functioning ,you may find that your electric radiator fan and compressor clutch will be cycling off and on depending on the outside air temperature

Package Included:

1 x A/C Compressor with Clutch（Professional Installer is Highly Recommended ）