Feature:
-Internally heated solder gun:Using ceramic heating core to generate heat stably from the inside to the outside.
-Black diamond soldering iron tip: Fast heat conduction, easy soldering, oxidation resistance.
-Soldering gun insulated handle: The soldering iron tip heats up quickly, not easy to aging, high temperature resistance.
-Solder wire ring holder: It can be one hands Holding,you don't need to point your tin wire and tin gun with all your hands again and you won't burn your hands accidentally any more.Or easy to use with both hands, tin wire ring is removable.
-High-quality power cord: The data cord is wrapped by rubber material, resistant to high temperature and oxidation.
-The internal structure design of the tin: Will not cause the malfunction of the tin.

Usage method:
1.Press down the tin inlet,insert the solder wire from the tin inlet,and buckle the plate,machine until the tin wire is sent to the tin guide pipe.
2.Connect the solder gun to the power supply ,turn on the power switch and preheat.
3.When the soldering gun is heated to enough heat,the welding machine can be operated by pulling the trigger.
4.When the tin wire is withdrawn, the tin inlet is pressed,and the tin wire is drawn at the same time.
5.To replace the heating core,first remove the window,remove the connecting wire of the heating core, and then remove the soldering nozzle ,the heating core can be replaced.

Specification:
Material: Plastic
Working temperature: 300-600℃
Product power: 80W
Applicable tin wire: 0.6~1.6mm
Warm-up time: 30 seconds
Operating voltage: AC110~220V
Size: Gun:19*15cm
Pump:20.5cm
Tweezers#1:14.5cm #2:12.5cm
ring holder:3.5*4.2cm
Screwdriver:13cm
Weight: Tin Wire Roll:50g
Product:425g/14.99oz/0.94lb

Package included:
1 *Soldering Gun
1 * Desoldering Pump
1 * Tin Wire Roll
2 * Tweezers
1*Solder wire ring holder
1*Phillips screwdriver