3V-60V
150W adjustable voltage current power adapter charger for
lithium / lithium iron phosphate/lead acid battery
Features:
1. Five modes to
use as a charger. Please adjust the voltage and charge according to the above
five kinds of batteries.
The rated
voltage is the voltage of the corresponding battery that the charger needs to
adjust; the full voltage is the voltage after the battery is fully charged, and
the light will automatically turn on after the battery is fully charged.
Steps to use the
charger:
①Connect the 220V
power supply, and then connect the battery.
②Press the mode
to select the corresponding battery type. (Caution: Selecting the wrong type of
battery for charging may have the risk of burning and exploding)
③ Press
Voltage+/- to select the corresponding rated battery voltage. (Note: Selecting
the wrong battery voltage for charging may result in a fire and explosion
hazard)
④Press current
+/- to select charging current. Usually choose 0.2c or choose the charging
current according to the battery specification.
⑤Press OK to
start charging, the red light is on. (Other key functions are invalid while
charging, but only stop is valid if there is an error LED)
⑥ When fully
charged, it will automatically stop charging and display -full-. It has the
function of preventing reverse battery connection. After the battery is
reversely connected, the red and green charging indicators flash at the same
time, and the charging is invalid.
The lead-acid
battery has an automatic detection function, selects the wrong voltage and does
not charge, and displays -Err-.
2. Use as a
power adapter. You must turn on the power and adjust the voltage and current
before connecting to the device.
①Multifunctional
digital display power supply: adjustable voltage and current. With adjustable
voltage 3V-60V and adjustable current 0.5-8A 150W. Finally press the button to
confirm and start to exit.
②Use it as a
power adapter. Please load your device wattage must be at least 30% less than
the power supply. For example, your device usually uses 48V2.5A,
This adapter
must be set to 48v3a before connecting to the device.
Specification:
Name: Power Adapter Charger
Input voltage: 220V/50Hz, 110V/60Hz
Output voltage: 3-60V adjustable
Maximum current: 8A
Maximum power: 150W
Applicable battery: suitable for lithium battery/hv
lithium battery/lithium iron phosphate/lead-acid battery/nimh battery
Size: 150*66*45mm
Colour: Black
Packing
included:
1 * Power Adapter Charger
Note:
1.
Due to manual measurements and slight color variations, please allow 1-3 cm
(0.4-1.18 inches) difference to suit different display settings.
2.
Due to the light and screen difference, the item's color may be slightly
different from the pictures. Please understand.


